Hello Conor, thanks for reviewing. On Wed, 19 Jul 2023 17:44:45 +0100 Conor Dooley <conor@xxxxxxxxxx> wrote: > Hey Luca, > > On Wed, Jul 19, 2023 at 05:21:46PM +0200, Luca Ceresoli wrote: > > Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller > > connected over SPI and the "ShenZhen New Display Co NDS040480800-V3" > > 480x800 panel based on it. > > > > Signed-off-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx> > > --- > > .../display/panel/ilitek,ili9806e.yaml | 69 +++++++++++++++++++ > > MAINTAINERS | 6 ++ > > 2 files changed, 75 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml > > new file mode 100644 > > index 000000000000..42abc6923065 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml > > @@ -0,0 +1,69 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Ilitek ILI9806E display panels > > + > > +maintainers: > > + - Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx> > > + > > +description: > > + This binding is for display panels using an Ilitek ILI9806E controller in > > + SPI mode. > > I figure you explicitly mention SPI mode here because it also supports > D{P,S}I? Exactly, DSI is supported as well by the chip. > > +allOf: > > + - $ref: panel-common.yaml# > > + > > +properties: > > + compatible: > > + items: > > + - enum: > > + # ShenZhen New Display Co 3.97" 480x800 RGB a-SI TFT LCD > > + - newdisplay,nds040480800-v3 > > + - const: ilitek,ili9806e > > + > > + reg: true > > + spi-max-frequency: true > > + reset-gpios: true > > + backlight: true > > + port: true > > + > > +required: > > + - compatible > > + - reg > > + - port > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/gpio/gpio.h> > > + > > + backlight: backlight { > > + compatible = "gpio-backlight"; > > + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; > > + }; > > + spi { > > Just a nit, a blank line between properties please. Clearly no > respinning needed for that... I agree. This comes from copy-paste from another bindings file so I'm probably sending a separate series to fix it and avoid the same issue in the future. Luca -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
