To get better accuration, use pixel clock rate to calculate lbcc instead of lane_mbps since the pixel clock rate is in KHz while lane_mbps is in MHz. Without this, distorted image can be seen on a HDMI monitor connected with i.MX93 11x11 EVK through ADV7535 DSI to HDMI bridge in 1920x1080p@60 video mode. Signed-off-by: Liu Ying <victor.liu@xxxxxxx> --- v1->v2: * No change. drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c index c754d55f71d1..332388fd86da 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c @@ -12,6 +12,7 @@ #include <linux/component.h> #include <linux/debugfs.h> #include <linux/iopoll.h> +#include <linux/math64.h> #include <linux/media-bus-format.h> #include <linux/module.h> #include <linux/of_device.h> @@ -762,8 +763,15 @@ static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi, u32 hcomponent) { u32 frac, lbcc; + int bpp; - lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8; + bpp = mipi_dsi_pixel_format_to_bpp(dsi->format); + if (bpp < 0) { + dev_err(dsi->dev, "failed to get bpp\n"); + return 0; + } + + lbcc = div_u64((u64)hcomponent * mode->clock * bpp, dsi->lanes * 8); frac = lbcc % mode->clock; lbcc = lbcc / mode->clock; -- 2.37.1