From: Michael Banack <banackm@xxxxxxxxxx>
To clarify the intent and reasoning behind the hotspot properties
introduce userspace documentation that goes over cursor handling
in para-virtualized environments.
The documentation is generic enough to not special case for any
specific hypervisor and should apply equally to all.
Signed-off-by: Zack Rusin <zackr@xxxxxxxxxx>
---
Documentation/gpu/drm-kms.rst | 6 ++++
drivers/gpu/drm/drm_plane.c | 58 ++++++++++++++++++++++++++++++++++-
2 files changed, 63 insertions(+), 1 deletion(-)
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index c92d425cb2dd..7159b3e90a8a 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -577,6 +577,12 @@ Variable Refresh Properties
.. kernel-doc:: drivers/gpu/drm/drm_connector.c
:doc: Variable refresh properties
+Cursor Hotspot Properties
+---------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_plane.c
+ :doc: hotspot properties
+
Existing KMS Properties
-----------------------
diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
index 1dc00ad4c33c..f3f2eae83cca 100644
--- a/drivers/gpu/drm/drm_plane.c
+++ b/drivers/gpu/drm/drm_plane.c
@@ -230,6 +230,61 @@ static int create_in_format_blob(struct drm_device *dev, struct drm_plane *plane
return 0;
}
+/**
+ * DOC: hotspot properties
+ *
+ * HOTSPOT_X: property to set mouse hotspot x offset.
+ * HOTSPOT_Y: property to set mouse hotspot y offset.
+ *
+ * When the plane is being used as a cursor image to display a mouse pointer,
+ * the "hotspot" is the offset within the cursor image where mouse events
+ * are expected to go.
+ *
+ * Positive values move the hotspot from the top-left corner of the cursor
+ * plane towards the right and bottom.
+ *
+ * Most display drivers do not need this information because the
+ * hotspot is not actually connected to anything visible on screen.
+ * However, this is necessary for display drivers like the para-virtualized
+ * drivers (eg qxl, vbox, virtio, vmwgfx), that are attached to a user console
+ * with a mouse pointer. Since these consoles are often being remoted over a
+ * network, they would otherwise have to wait to display the pointer movement to
+ * the user until a full network round-trip has occurred. New mouse events have
+ * to be sent from the user's console, over the network to the virtual input
+ * devices, forwarded to the desktop for processing, and then the cursor plane's
+ * position can be updated and sent back to the user's console over the network.
+ * Instead, with the hotspot information, the console can anticipate the new
+ * location, and draw the mouse cursor there before the confirmation comes in.
+ * To do that correctly, the user's console must be able predict how the
+ * desktop will process mouse events, which normally requires the desktop's
+ * mouse topology information, ie where each CRTC sits in the mouse coordinate
+ * space. This is typically sent to the para-virtualized drivers using some
+ * driver-specific method, and the driver then forwards it to the console by
+ * way of the virtual display device or hypervisor.
+ *
+ * The assumption is generally made that there is only one cursor plane being
+ * used this way at a time, and that the desktop is feeding all mouse devices
+ * into the same global pointer. Para-virtualized drivers that require this
+ * should only be exposing a single cursor plane, or find some other way
+ * to coordinate with a userspace desktop that supports multiple pointers.
+ * If the hotspot properties are set, the cursor plane is therefore assumed to be
+ * used only for displaying a mouse cursor image, and the position of the combined
+ * cursor plane + offset can therefore be used for coordinating with input from a
+ * mouse device.
+ *
+ * The cursor will then be drawn either at the location of the plane in the CRTC
+ * console, or as a free-floating cursor plane on the user's console
+ * corresponding to their desktop mouse position.
+ *
+ * DRM clients which would like to work correctly on drivers which expose
+ * hotspot properties should advertise DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT.
+ * Setting this property on drivers which do not special case
+ * cursor planes will return EOPNOTSUPP, which can be used by userspace to
+ * gauge requirements of the hardware/drivers they're running on. Advertising
+ * DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT implies that the userspace client will be
+ * correctly setting the hotspot properties.
+ */
+
/**
* drm_plane_create_hotspot_properties - creates the mouse hotspot
* properties and attaches them to the given cursor plane
@@ -237,7 +292,8 @@ static int create_in_format_blob(struct drm_device *dev, struct drm_plane *plane
* @plane: drm cursor plane
*
* This function enables the mouse hotspot property on a given
- * cursor plane.
+ * cursor plane. Look at the documentation for hotspot properties
+ * to get a better understanding for what they're used for.
*
* RETURNS:
* Zero for success or -errno
--
2.39.2
