Enable and configure the dispcc node on SM6125 for consumption by MDSS later on. Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm6125.dtsi | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 90e242ad7943..23d1284793d2 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2021, Martin Botka <martin.botka@xxxxxxxxxxxxxx> */ +#include <dt-bindings/clock/qcom,dispcc-sm6125.h> #include <dt-bindings/clock/qcom,gcc-sm6125.h> #include <dt-bindings/clock/qcom,sm6125-gpucc.h> #include <dt-bindings/clock/qcom,rpmcc.h> @@ -1208,6 +1209,34 @@ sram@4690000 { reg = <0x04690000 0x10000>; }; + dispcc: clock-controller@5f00000 { + compatible = "qcom,sm6125-dispcc"; + reg = <0x05f00000 0x20000>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk", + "cfg_ahb_clk", + "gcc_disp_gpll0_div_clk_src"; + + required-opps = <&rpmpd_opp_ret>; + power-domains = <&rpmpd SM6125_VDDCX>; + + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + apps_smmu: iommu@c600000 { compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0c600000 0x80000>; -- 2.41.0