Re: [RFC PATCH 00/10] Device Memory TCP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7/10/23 15:32, Mina Almasry wrote:
* TL;DR:

Device memory TCP (devmem TCP) is a proposal for transferring data to and/or
from device memory efficiently, without bouncing the data to a host memory
buffer.

(I'm writing this as someone who might plausibly use this mechanism, but I don't think I'm very likely to end up working on the kernel side, unless I somehow feel extremely inspired to implement it for i40e.)

I looked at these patches and the GVE tree, and I'm trying to wrap my head around the data path. As I understand it, for RX:

1. The GVE driver notices that the queue is programmed to use devmem, and it programs the NIC to copy packet payloads to the devmem that has been programmed. 2. The NIC receives the packet and copies the header to kernel memory and the payload to dma-buf memory.
3. The kernel tells userspace where in the dma-buf the data is.
4. Userspace does something with the data.
5. Userspace does DONTNEED to recycle the memory and make it available for new received packets.

Did I get this right?

This seems a bit awkward if there's any chance that packets not intended for the target device end up in the rxq.

I'm wondering if a more capable if somewhat higher latency model could work where the NIC stores received packets in its own device memory. Then userspace (or the kernel or a driver or whatever) could initiate a separate DMA from the NIC to the final target *after* reading the headers. Can the hardware support this?

Another way of putting this is: steering received data to a specific device based on the *receive queue* forces the logic selecting a destination device to be the same as the logic selecting the queue. RX steering logic is pretty limited on most hardware (as far as I know -- certainly I've never had much luck doing anything especially intelligent with RX flow steering, and I've tried on a couple of different brands of supposedly fancy NICs). But Linux has very nice capabilities to direct packets, in software, to where they are supposed to go, and it would be nice if all that logic could just work, scalably, with device memory. If Linux could examine headers *before* the payload gets DMAed to wherever it goes, I think this could plausibly work quite nicely. One could even have an easy-to-use interface in which one directs a *socket* to a PCIe device. I expect, although I've never looked at the datasheets, that the kernel could even efficiently make rx decisions based on data in device memory on upcoming CXL NICs where device memory could participate in the host cache hierarchy.

My real ulterior motive is that I think it would be great to use an ability like this for DPDK-like uses. Wouldn't it be nifty if I could open a normal TCP socket, then, after it's open, ask the kernel to kindly DMA the results directly to my application memory (via udmabuf, perhaps)? Or have a whole VLAN or macvlan get directed to a userspace queue, etc?


It also seems a bit odd to me that the binding from rxq to dma-buf is established by programming the dma-buf. This makes the security model (and the mental model) awkward -- this binding is a setting on the *queue*, not the dma-buf, and in a containerized or privilege-separated system, a process could have enough privilege to make a dma-buf somewhere but not have any privileges on the NIC. (And may not even have the NIC present in its network namespace!)

--Andy



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux