On Tue, Jul 11, 2023 at 3:23 PM Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> wrote:
>
> On Tue, 11 Jul 2023, Chen-Yu Tsai <wenst@xxxxxxxxxxxx> wrote:
> > On Mon, Jul 10, 2023 at 6:32 PM Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> wrote:
> >>
> >> On Mon, 10 Jul 2023, Chen-Yu Tsai <wenst@xxxxxxxxxxxx> wrote:
> >> > The DRM DP code has macros for the DP power sequencing commands. Use
> >> > them in the anx7625 driver instead of raw numbers.
> >> >
> >> > Fixes: 548b512e144f ("drm/bridge: anx7625: send DPCD command to downstream")
> >> > Fixes: 27f26359de9b ("drm/bridge: anx7625: Set downstream sink into normal status")
> >> > Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
> >> > Reviewed-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
> >> > ---
> >> > Collected tags and rebased on v6.5-rc1.
> >> >
> >> > drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++----
> >> > 1 file changed, 4 insertions(+), 4 deletions(-)
> >> >
> >> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> >> > index 8b985efdc086..9db3784cb554 100644
> >> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> >> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> >> > @@ -931,8 +931,8 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
> >> >
> >> > dev_dbg(dev, "set downstream sink into normal\n");
> >> > /* Downstream sink enter into normal mode */
> >> > - data = 1;
> >> > - ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
> >> > + data = DP_SET_POWER_D0;
> >> > + ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, DP_SET_POWER, 1, &data);
> >>
> >> So you have code to implement the drm dp aux abstractions, why aren't
> >> you using drm_dp_dpcd_writeb() and friends here?
> >
> > I didn't write the original code. Nor do I do much DP stuff. IIRC someone
> > pointed out to me these had proper macros, so I converted them.
> >
> > Would you accept a follow-up patch to convert the AUX transfers to the
> > DRM abstractions?
>
> I believe they would be welcome, but I'm personally not familiar with
> the driver in question.
OK. I take it you are not blocking this patch then?
ChenYu
