On Mon, Jul 10, 2023 at 6:32 PM Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> wrote:
>
> On Mon, 10 Jul 2023, Chen-Yu Tsai <wenst@xxxxxxxxxxxx> wrote:
> > The DRM DP code has macros for the DP power sequencing commands. Use
> > them in the anx7625 driver instead of raw numbers.
> >
> > Fixes: 548b512e144f ("drm/bridge: anx7625: send DPCD command to downstream")
> > Fixes: 27f26359de9b ("drm/bridge: anx7625: Set downstream sink into normal status")
> > Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
> > Reviewed-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
> > ---
> > Collected tags and rebased on v6.5-rc1.
> >
> > drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++----
> > 1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > index 8b985efdc086..9db3784cb554 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > @@ -931,8 +931,8 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
> >
> > dev_dbg(dev, "set downstream sink into normal\n");
> > /* Downstream sink enter into normal mode */
> > - data = 1;
> > - ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
> > + data = DP_SET_POWER_D0;
> > + ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, DP_SET_POWER, 1, &data);
>
> So you have code to implement the drm dp aux abstractions, why aren't
> you using drm_dp_dpcd_writeb() and friends here?
I didn't write the original code. Nor do I do much DP stuff. IIRC someone
pointed out to me these had proper macros, so I converted them.
Would you accept a follow-up patch to convert the AUX transfers to the
DRM abstractions?
ChenYu
> BR,
> Jani.
>
>
> > if (ret < 0)
> > dev_err(dev, "IO error : set sink into normal mode fail\n");
> >
> > @@ -971,8 +971,8 @@ static void anx7625_dp_stop(struct anx7625_data *ctx)
> >
> > dev_dbg(dev, "notify downstream enter into standby\n");
> > /* Downstream monitor enter into standby mode */
> > - data = 2;
> > - ret |= anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
> > + data = DP_SET_POWER_D3;
> > + ret |= anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, DP_SET_POWER, 1, &data);
> > if (ret < 0)
> > DRM_DEV_ERROR(dev, "IO error : mute video fail\n");
>
> --
> Jani Nikula, Intel Open Source Graphics Center
