Re: [EXT] Re: [PATCH v6 4/8] phy: Add HDMI configuration options

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/07/2023 10:28, Sandor Yu wrote:
Hi Dmitry,

Thanks for your comments,

From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
On 15/06/2023 04:38, Sandor Yu wrote:
Allow HDMI PHYs to be configured through the generic functions through
a custom structure added to the generic union.

The parameters added here are based on HDMI PHY implementation
practices.  The current set of parameters should cover the potential
users.

Signed-off-by: Sandor Yu <Sandor.yu@xxxxxxx>
---
   include/linux/phy/phy-hdmi.h | 38
++++++++++++++++++++++++++++++++++++
   include/linux/phy/phy.h      |  7 ++++++-
   2 files changed, 44 insertions(+), 1 deletion(-)
   create mode 100644 include/linux/phy/phy-hdmi.h

diff --git a/include/linux/phy/phy-hdmi.h
b/include/linux/phy/phy-hdmi.h new file mode 100644 index
000000000000..5765aa5bc175
--- /dev/null
+++ b/include/linux/phy/phy-hdmi.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2022 NXP
+ */
+
+#ifndef __PHY_HDMI_H_
+#define __PHY_HDMI_H_
+
+/**
+ * Pixel Encoding as HDMI Specification
+ * RGB, YUV422, YUV444:HDMI Specification 1.4a Section 6.5
+ * YUV420: HDMI Specification 2.a Section 7.1  */ enum
+hdmi_phy_colorspace {
+     HDMI_PHY_COLORSPACE_RGB,        /* RGB 4:4:4 */
+     HDMI_PHY_COLORSPACE_YUV422,     /* YCbCr 4:2:2 */
+     HDMI_PHY_COLORSPACE_YUV444,     /* YCbCr 4:4:4 */
+     HDMI_PHY_COLORSPACE_YUV420,     /* YCbCr 4:2:0 */
+     HDMI_PHY_COLORSPACE_RESERVED4,
+     HDMI_PHY_COLORSPACE_RESERVED5,
+     HDMI_PHY_COLORSPACE_RESERVED6,
+};

This enum duplicates enum hdmi_colorspace from <linux/hdmi.h> HDMI 2.0
defines '7' to be IDO-defined.

Would it be better to use that enum instead?
Accept. I will create head file hdmi_colorspace.h to reuse enum hdmi_colorspace in <linux/hdmi.h>.

Excuse me, it was supposed to be a question.

Do you need another header file to reuse this enum?


B.R
Sandor

+
+/**
+ * struct phy_configure_opts_hdmi - HDMI configuration set
+ * @pixel_clk_rate:  Pixel clock of video modes in KHz.
+ * @bpc: Maximum bits per color channel.
+ * @color_space: Colorspace in enum hdmi_phy_colorspace.
+ *
+ * This structure is used to represent the configuration state of a HDMI phy.
+ */
+struct phy_configure_opts_hdmi {
+     unsigned int pixel_clk_rate;
+     unsigned int bpc;
+     enum hdmi_phy_colorspace color_space; };
+
+#endif /* __PHY_HDMI_H_ */

[skipped the rest]

--
With best wishes
Dmitry


--
With best wishes
Dmitry




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux