Re: [PATCH 01/13] drm/msm/dpu: cleanup dpu_kms_hw_init error path

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

On 08/07/2023 02:25, Konrad Dybcio wrote:
> On 7.07.2023 22:37, Dmitry Baryshkov wrote:
> > It was noticed that dpu_kms_hw_init()'s error path contains several
> > labels which point to the same code path. Replace all of them with a
> > single label.
> >
> > Suggested-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> it's the first time I'm seeing this code

It is Suggested-by, not something else. And you pointed it out in 
https://lore.kernel.org/linux-arm-msm/6d598438-f10f-8678-7878-829b8b3ae790@xxxxxxxxxx/

> Konrad
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> > ---
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 21 +++++++++------------
> >   1 file changed, 9 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > index c11b3ab572ab..e7ac02e92f42 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > @@ -1037,7 +1037,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
> >   	if (!dpu_kms->catalog) {
> >   		DPU_ERROR("device config not known!\n");
> >   		rc = -EINVAL;
> > -		goto power_error;
> > +		goto err_pm_put;
> >   	}
> >   
> >   	/*
> > @@ -1047,13 +1047,13 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
> >   	rc = _dpu_kms_mmu_init(dpu_kms);
> >   	if (rc) {
> >   		DPU_ERROR("dpu_kms_mmu_init failed: %d\n", rc);
> > -		goto power_error;
> > +		goto err_pm_put;
> >   	}
> >   
> >   	rc = dpu_rm_init(&dpu_kms->rm, dpu_kms->catalog, dpu_kms->mmio);
> >   	if (rc) {
> >   		DPU_ERROR("rm init failed: %d\n", rc);
> > -		goto power_error;
> > +		goto err_pm_put;
> >   	}
> >   
> >   	dpu_kms->rm_init = true;
> > @@ -1065,7 +1065,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
> >   		rc = PTR_ERR(dpu_kms->hw_mdp);
> >   		DPU_ERROR("failed to get hw_mdp: %d\n", rc);
> >   		dpu_kms->hw_mdp = NULL;
> > -		goto power_error;
> > +		goto err_pm_put;
> >   	}
> >   
> >   	for (i = 0; i < dpu_kms->catalog->vbif_count; i++) {
> > @@ -1076,7 +1076,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
> >   		if (IS_ERR(hw)) {
> >   			rc = PTR_ERR(hw);
> >   			DPU_ERROR("failed to init vbif %d: %d\n", vbif->id, rc);
> > -			goto power_error;
> > +			goto err_pm_put;
> >   		}
> >   
> >   		dpu_kms->hw_vbif[vbif->id] = hw;
> > @@ -1092,7 +1092,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
> >   	rc = dpu_core_perf_init(&dpu_kms->perf, dpu_kms->catalog->perf, max_core_clk_rate);
> >   	if (rc) {
> >   		DPU_ERROR("failed to init perf %d\n", rc);
> > -		goto perf_err;
> > +		goto err_pm_put;
> >   	}
> >   
> >   	dpu_kms->hw_intr = dpu_hw_intr_init(dpu_kms->mmio, dpu_kms->catalog);
> > @@ -1100,7 +1100,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
> >   		rc = PTR_ERR(dpu_kms->hw_intr);
> >   		DPU_ERROR("hw_intr init failed: %d\n", rc);
> >   		dpu_kms->hw_intr = NULL;
> > -		goto hw_intr_init_err;
> > +		goto err_pm_put;
> >   	}
> >   
> >   	dev->mode_config.min_width = 0;
> > @@ -1125,7 +1125,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
> >   	rc = _dpu_kms_drm_obj_init(dpu_kms);
> >   	if (rc) {
> >   		DPU_ERROR("modeset init failed: %d\n", rc);
> > -		goto drm_obj_init_err;
> > +		goto err_pm_put;
> >   	}
> >   
> >   	dpu_vbif_init_memtypes(dpu_kms);
> > @@ -1134,10 +1134,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
> >   
> >   	return 0;
> >   
> > -drm_obj_init_err:
> > -hw_intr_init_err:
> > -perf_err:
> > -power_error:
> > +err_pm_put:
> >   	pm_runtime_put_sync(&dpu_kms->pdev->dev);
> >   error:
> >   	_dpu_kms_hw_destroy(dpu_kms);

--
With best wishes
Dmitry