On Fri, Jun 30, 2023 at 11:27 PM Jessica Zhang
<quic_jesszhan@xxxxxxxxxxx> wrote:
>
>
>
> On 6/30/2023 7:43 AM, Sebastian Wick wrote:
> > On Fri, Jun 30, 2023 at 2:26 AM Jessica Zhang <quic_jesszhan@xxxxxxxxxxx> wrote:
> >>
> >> Add support for pixel_source property to drm_plane and related
> >> documentation.
> >>
> >> This enum property will allow user to specify a pixel source for the
> >> plane. Possible pixel sources will be defined in the
> >> drm_plane_pixel_source enum.
> >>
> >> The current possible pixel sources are DRM_PLANE_PIXEL_SOURCE_FB and
> >> DRM_PLANE_PIXEL_SOURCE_COLOR. The default value is *_SOURCE_FB.
> >>
> >> Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
> >> ---
> >> drivers/gpu/drm/drm_atomic_state_helper.c | 1 +
> >> drivers/gpu/drm/drm_atomic_uapi.c | 4 ++
> >> drivers/gpu/drm/drm_blend.c | 81 +++++++++++++++++++++++++++++++
> >> include/drm/drm_blend.h | 2 +
> >> include/drm/drm_plane.h | 21 ++++++++
> >> 5 files changed, 109 insertions(+)
> >>
> >> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> >> index fe14be2bd2b2..86fb876efbe6 100644
> >> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> >> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> >> @@ -252,6 +252,7 @@ void __drm_atomic_helper_plane_state_reset(struct drm_plane_state *plane_state,
> >>
> >> plane_state->alpha = DRM_BLEND_ALPHA_OPAQUE;
> >> plane_state->pixel_blend_mode = DRM_MODE_BLEND_PREMULTI;
> >> + plane_state->pixel_source = DRM_PLANE_PIXEL_SOURCE_FB;
> >>
> >> if (plane_state->solid_fill_blob) {
> >> drm_property_blob_put(plane_state->solid_fill_blob);
> >> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> >> index a28b4ee79444..6e59c21af66b 100644
> >> --- a/drivers/gpu/drm/drm_atomic_uapi.c
> >> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> >> @@ -596,6 +596,8 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
> >> drm_property_blob_put(solid_fill);
> >>
> >> return ret;
> >> + } else if (property == plane->pixel_source_property) {
> >> + state->pixel_source = val;
> >> } else if (property == plane->alpha_property) {
> >> state->alpha = val;
> >> } else if (property == plane->blend_mode_property) {
> >> @@ -671,6 +673,8 @@ drm_atomic_plane_get_property(struct drm_plane *plane,
> >> } else if (property == plane->solid_fill_property) {
> >> *val = state->solid_fill_blob ?
> >> state->solid_fill_blob->base.id : 0;
> >> + } else if (property == plane->pixel_source_property) {
> >> + *val = state->pixel_source;
> >> } else if (property == plane->alpha_property) {
> >> *val = state->alpha;
> >> } else if (property == plane->blend_mode_property) {
> >> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> >> index 38c3c5d6453a..8c100a957ee2 100644
> >> --- a/drivers/gpu/drm/drm_blend.c
> >> +++ b/drivers/gpu/drm/drm_blend.c
> >> @@ -189,6 +189,18 @@
> >> * solid_fill is set up with drm_plane_create_solid_fill_property(). It
> >> * contains pixel data that drivers can use to fill a plane.
> >> *
> >> + * pixel_source:
> >> + * pixel_source is set up with drm_plane_create_pixel_source_property().
> >> + * It is used to toggle the source of pixel data for the plane.
> >> + *
> >> + * Possible values:
> >> + *
> >> + * "FB":
> >> + * Framebuffer source
> >> + *
> >> + * "COLOR":
> >> + * solid_fill source
> >> + *
> >> * Note that all the property extensions described here apply either to the
> >> * plane or the CRTC (e.g. for the background color, which currently is not
> >> * exposed and assumed to be black).
> >> @@ -648,3 +660,72 @@ int drm_plane_create_solid_fill_property(struct drm_plane *plane)
> >> return 0;
> >> }
> >> EXPORT_SYMBOL(drm_plane_create_solid_fill_property);
> >> +
> >> +/**
> >> + * drm_plane_create_pixel_source_property - create a new pixel source property
> >> + * @plane: drm plane
> >> + * @supported_sources: bitmask of supported pixel_sources for the driver (NOT
> >> + * including DRM_PLANE_PIXEL_SOURCE_FB, as it will be supported
> >> + * by default).
> >> + *
> >> + * This creates a new property describing the current source of pixel data for the
> >> + * plane.
> >> + *
> >> + * The property is exposed to userspace as an enumeration property called
> >> + * "pixel_source" and has the following enumeration values:
> >> + *
> >> + * "FB":
> >> + * Framebuffer pixel source
> >> + *
> >> + * "COLOR":
> >> + * Solid fill color pixel source
> >
> > Can we add a "NONE" value?
> >
> > I know it has been discussed earlier if we *need* this and I don't
> > think we do. I just think it would be better API design to disable
> > planes this way than having to know that a framebuffer pixel source
> > with a NULL framebuffer disables the plane. Obviously also keep the
> > old behavior for backwards compatibility.
>
> Hi Sebastian,
>
> Sounds good.
>
> So if pixel_source == NONE disables the planes, would that mean cases
> where pixel_source == COLOR && solid_fill_blob == NULL, the atomic
> commit should throw an error?
I would say so, yes.
> Thanks,
>
> Jessica Zhang
>
> >
> >> + *
> >> + * Returns:
> >> + * Zero on success, negative errno on failure.
> >> + */
> >> +int drm_plane_create_pixel_source_property(struct drm_plane *plane,
> >> + unsigned int supported_sources)
> >> +{
> >> + struct drm_device *dev = plane->dev;
> >> + struct drm_property *prop;
> >> + const struct drm_prop_enum_list enum_list[] = {
> >> + { DRM_PLANE_PIXEL_SOURCE_FB, "FB" },
> >> + { DRM_PLANE_PIXEL_SOURCE_COLOR, "COLOR" },
> >> + };
> >> + unsigned int valid_source_mask = BIT(DRM_PLANE_PIXEL_SOURCE_FB) |
> >> + BIT(DRM_PLANE_PIXEL_SOURCE_COLOR);
> >> + int i;
> >> +
> >> + /* FB is supported by default */
> >> + supported_sources |= BIT(DRM_PLANE_PIXEL_SOURCE_FB);
> >> +
> >> + if (WARN_ON(supported_sources & ~valid_source_mask))
> >> + return -EINVAL;
> >> +
> >> + prop = drm_property_create(dev, DRM_MODE_PROP_ENUM, "pixel_source",
> >> + hweight32(supported_sources));
> >> +
> >> + if (!prop)
> >> + return -ENOMEM;
> >> +
> >> + for (i = 0; i < ARRAY_SIZE(enum_list); i++) {
> >> + int ret;
> >> +
> >> + if (!(BIT(enum_list[i].type) & supported_sources))
> >> + continue;
> >> +
> >> + ret = drm_property_add_enum(prop, enum_list[i].type, enum_list[i].name);
> >> +
> >> + if (ret) {
> >> + drm_property_destroy(dev, prop);
> >> +
> >> + return ret;
> >> + }
> >> + }
> >> +
> >> + drm_object_attach_property(&plane->base, prop, DRM_PLANE_PIXEL_SOURCE_FB);
> >> + plane->pixel_source_property = prop;
> >> +
> >> + return 0;
> >> +}
> >> +EXPORT_SYMBOL(drm_plane_create_pixel_source_property);
> >> diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
> >> index 0338a860b9c8..31af7cfa5b1b 100644
> >> --- a/include/drm/drm_blend.h
> >> +++ b/include/drm/drm_blend.h
> >> @@ -59,4 +59,6 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
> >> int drm_plane_create_blend_mode_property(struct drm_plane *plane,
> >> unsigned int supported_modes);
> >> int drm_plane_create_solid_fill_property(struct drm_plane *plane);
> >> +int drm_plane_create_pixel_source_property(struct drm_plane *plane,
> >> + unsigned int supported_sources);
> >> #endif
> >> diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
> >> index f6ab313cb83e..73fb6cf8a5d9 100644
> >> --- a/include/drm/drm_plane.h
> >> +++ b/include/drm/drm_plane.h
> >> @@ -59,6 +59,12 @@ struct drm_solid_fill {
> >> uint32_t b;
> >> };
> >>
> >> +enum drm_plane_pixel_source {
> >> + DRM_PLANE_PIXEL_SOURCE_FB,
> >> + DRM_PLANE_PIXEL_SOURCE_COLOR,
> >> + DRM_PLANE_PIXEL_SOURCE_MAX
> >> +};
> >> +
> >> /**
> >> * struct drm_plane_state - mutable plane state
> >> *
> >> @@ -152,6 +158,14 @@ struct drm_plane_state {
> >> */
> >> struct drm_solid_fill solid_fill;
> >>
> >> + /*
> >> + * @pixel_source:
> >> + *
> >> + * Source of pixel information for the plane. See
> >> + * drm_plane_create_pixel_source_property() for more details.
> >> + */
> >> + enum drm_plane_pixel_source pixel_source;
> >> +
> >> /**
> >> * @alpha:
> >> * Opacity of the plane with 0 as completely transparent and 0xffff as
> >> @@ -742,6 +756,13 @@ struct drm_plane {
> >> */
> >> struct drm_property *solid_fill_property;
> >>
> >> + /*
> >> + * @pixel_source_property:
> >> + * Optional pixel_source property for this plane. See
> >> + * drm_plane_create_pixel_source_property().
> >> + */
> >> + struct drm_property *pixel_source_property;
> >> +
> >> /**
> >> * @alpha_property:
> >> * Optional alpha property for this plane. See
> >>
> >> --
> >> 2.41.0
> >>
> >
>
