This add nodes to support the Khadas TS050 panel on the Khadas VIM3 & VIM3L boards. Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> --- .../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi | 2 +- arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 76 ++++++++++++++++++++++ .../boot/dts/amlogic/meson-sm1-khadas-vim3l.dts | 2 +- 3 files changed, 78 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi index 16dd409051b4..81c3057143b4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi @@ -98,7 +98,7 @@ &pwm_ab { }; &pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-0 = <&pwm_ao_c_6_pins>, <&pwm_ao_d_e_pins>; pinctrl-names = "default"; clocks = <&xtal>; clock-names = "clkin1"; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index c9705941e4ab..0c50a32bb0c0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -40,6 +40,14 @@ button-function { }; }; + panel_backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm_AO_cd 0 25000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <200>; + }; + leds { compatible = "gpio-leds"; @@ -359,6 +367,23 @@ rtc: rtc@51 { }; }; +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; + + touch-controller@38 { + compatible = "edt,edt-ft5206"; + reg = <0x38>; + interrupt-parent = <&gpio_intc>; + interrupts = <66 IRQ_TYPE_EDGE_FALLING>; /* GPIOA_5 */ + reset-gpio = <&gpio_expander 6 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + status = "okay"; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; @@ -366,6 +391,57 @@ &ir { linux,rc-map-name = "rc-khadas"; }; +&mipi_dsi { + status = "okay"; + + assigned-clocks = <&clkc CLKID_GP0_PLL>, + <&clkc CLKID_MIPI_DSI_PXCLK_SEL>, + <&clkc CLKID_MIPI_DSI_PXCLK>, + <&clkc CLKID_CTS_ENCL_SEL>, + <&clkc CLKID_VCLK2_SEL>; + assigned-clock-parents = <0>, + <&clkc CLKID_GP0_PLL>, + <0>, + <&clkc CLKID_VCLK2_DIV1>, + <&clkc CLKID_GP0_PLL>; + assigned-clock-rates = <960000000>, + <0>, + <960000000>, + <0>, + <0>; + + panel@0 { + compatible = "khadas,ts050"; + reset-gpios = <&gpio_expander 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpio_expander 1 GPIO_ACTIVE_HIGH>; + power-supply = <&vcc_3v3>; + backlight = <&panel_backlight>; + width-mm = <64>; + height-mm = <118>; + reg = <0>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&mipi_analog_dphy { + status = "okay"; +}; + +&mipi_dphy { + status = "okay"; +}; + +&mipi_dsi_panel_port { + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; +}; + &pcie { reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts index 9c0b544e2209..cb52a55ab70a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts @@ -76,7 +76,7 @@ &cpu3 { }; &pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-0 = <&pwm_ao_c_6_pins>, <&pwm_ao_d_e_pins>; pinctrl-names = "default"; clocks = <&xtal>; clock-names = "clkin1"; -- 2.34.1