On Tue, Jun 27, 2023 at 10:14:22PM +0200, Marijn Suijten wrote: > Document the SM6125 MDSS. > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> > Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx> > --- > .../bindings/display/msm/qcom,sm6125-mdss.yaml | 217 +++++++++++++++++++++ > 1 file changed, 217 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml > new file mode 100644 > index 000000000000..2525482424cb > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml > @@ -0,0 +1,217 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/qcom,sm6125-mdss.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm SM6125 Display MDSS > + > +maintainers: > + - Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx> > + > +description: > + SM6125 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks > + like DPU display controller, DSI and DP interfaces etc. > + > +$ref: /schemas/display/msm/mdss-common.yaml# > + > +properties: > + compatible: > + const: qcom,sm6125-mdss > + > + clocks: > + items: > + - description: Display AHB clock from gcc > + - description: Display AHB clock > + - description: Display core clock > + > + clock-names: > + items: > + - const: iface > + - const: ahb > + - const: core > + > + iommus: > + maxItems: 1 > + > + interconnects: > + maxItems: 2 > + > + interconnect-names: > + maxItems: 2 > + > +patternProperties: > + "^display-controller@[0-9a-f]+$": > + type: object > + properties: > + compatible: > + const: qcom,sm6125-dpu > + > + "^dsi@[0-9a-f]+$": > + type: object > + properties: > + compatible: > + items: > + - const: qcom,sm6125-dsi-ctrl > + - const: qcom,mdss-dsi-ctrl > + > + "^phy@[0-9a-f]+$": > + type: object > + properties: > + compatible: > + const: qcom,sm6125-dsi-phy-14nm > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,dispcc-sm6125.h> > + #include <dt-bindings/clock/qcom,gcc-sm6125.h> > + #include <dt-bindings/clock/qcom,rpmcc.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/power/qcom-rpmpd.h> > + > + display-subsystem@5e00000 { > + compatible = "qcom,sm6125-mdss"; > + reg = <0x05e00000 0x1000>; > + reg-names = "mdss"; > + > + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", > + "ahb", > + "core"; > + > + power-domains = <&dispcc MDSS_GDSC>; > + > + iommus = <&apps_smmu 0x400 0x0>; > + > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + status = "disabled"; Examples should not be disabled. Drop. > + > + display-controller@5e01000 { > + compatible = "qcom,sm6125-dpu"; > + reg = <0x05e01000 0x83208>, > + <0x05eb0000 0x2008>; > + reg-names = "mdp", "vbif"; > + > + interrupt-parent = <&mdss>; > + interrupts = <0>; > + > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_ROT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "bus", > + "iface", > + "rot", > + "lut", > + "core", > + "vsync"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + assigned-clock-rates = <19200000>; > + > + operating-points-v2 = <&mdp_opp_table>; > + power-domains = <&rpmpd SM6125_VDDCX>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dpu_intf1_out: endpoint { > + remote-endpoint = <&mdss_dsi0_in>; > + }; > + }; > + }; > + }; > + > + dsi@5e94000 { > + compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl"; > + reg = <0x05e94000 0x400>; > + reg-names = "dsi_ctrl"; > + > + interrupt-parent = <&mdss>; > + interrupts = <4>; > + > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, > + <&dispcc DISP_CC_MDSS_ESC0_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&gcc GCC_DISP_HF_AXI_CLK>; > + clock-names = "byte", > + "byte_intf", > + "pixel", > + "core", > + "iface", > + "bus"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; > + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; > + > + operating-points-v2 = <&dsi_opp_table>; > + power-domains = <&rpmpd SM6125_VDDCX>; > + > + phys = <&mdss_dsi0_phy>; > + phy-names = "dsi"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + status = "disabled"; Ditto. > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + mdss_dsi0_in: endpoint { > + remote-endpoint = <&dpu_intf1_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + mdss_dsi0_out: endpoint { > + }; > + }; > + }; > + }; > + > + phy@5e94400 { > + compatible = "qcom,sm6125-dsi-phy-14nm"; > + reg = <0x05e94400 0x100>, > + <0x05e94500 0x300>, > + <0x05e94800 0x188>; > + reg-names = "dsi_phy", > + "dsi_phy_lane", > + "dsi_pll"; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&rpmcc RPM_SMD_XO_CLK_SRC>; > + clock-names = "iface", > + "ref"; > + > + required-opps = <&rpmpd_opp_svs>; > + power-domains = <&rpmpd SM6125_VDDMX>; > + > + status = "disabled"; Ditto > + }; > + }; > +... > > -- > 2.41.0 >
