On 27.06.2023 22:14, Marijn Suijten wrote: > Add the DT nodes that describe the MDSS hardware on SM6125, containing > one MDP (display controller) together with a single DSI and DSI PHY. No > DisplayPort support is added for now. > > Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Konrad > arch/arm64/boot/dts/qcom/sm6125.dtsi | 191 ++++++++++++++++++++++++++++++++++- > 1 file changed, 189 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi > index a5cc0d43d2d9..b21fa1256f95 100644 > --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi > @@ -1204,12 +1204,199 @@ sram@4690000 { > reg = <0x04690000 0x10000>; > }; > > + mdss: display-subsystem@5e00000 { > + compatible = "qcom,sm6125-mdss"; > + reg = <0x05e00000 0x1000>; > + reg-names = "mdss"; > + > + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", > + "ahb", > + "core"; > + > + power-domains = <&dispcc MDSS_GDSC>; > + > + iommus = <&apps_smmu 0x400 0x0>; > + > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + status = "disabled"; > + > + mdss_mdp: display-controller@5e01000 { > + compatible = "qcom,sm6125-dpu"; > + reg = <0x05e01000 0x83208>, > + <0x05eb0000 0x2008>; > + reg-names = "mdp", "vbif"; > + > + interrupt-parent = <&mdss>; > + interrupts = <0>; > + > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_ROT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "bus", > + "iface", > + "rot", > + "lut", > + "core", > + "vsync"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + assigned-clock-rates = <19200000>; > + > + operating-points-v2 = <&mdp_opp_table>; > + power-domains = <&rpmpd SM6125_VDDCX>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dpu_intf1_out: endpoint { > + remote-endpoint = <&mdss_dsi0_in>; > + }; > + }; > + }; > + > + mdp_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-192000000 { > + opp-hz = /bits/ 64 <192000000>; > + required-opps = <&rpmpd_opp_low_svs>; > + }; > + > + opp-256000000 { > + opp-hz = /bits/ 64 <256000000>; > + required-opps = <&rpmpd_opp_svs>; > + }; > + > + opp-307200000 { > + opp-hz = /bits/ 64 <307200000>; > + required-opps = <&rpmpd_opp_svs_plus>; > + }; > + > + opp-384000000 { > + opp-hz = /bits/ 64 <384000000>; > + required-opps = <&rpmpd_opp_nom>; > + }; > + > + opp-400000000 { > + opp-hz = /bits/ 64 <400000000>; > + required-opps = <&rpmpd_opp_turbo>; > + }; > + }; > + }; > + > + mdss_dsi0: dsi@5e94000 { > + compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl"; > + reg = <0x05e94000 0x400>; > + reg-names = "dsi_ctrl"; > + > + interrupt-parent = <&mdss>; > + interrupts = <4>; > + > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, > + <&dispcc DISP_CC_MDSS_ESC0_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&gcc GCC_DISP_HF_AXI_CLK>; > + clock-names = "byte", > + "byte_intf", > + "pixel", > + "core", > + "iface", > + "bus"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; > + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; > + > + operating-points-v2 = <&dsi_opp_table>; > + power-domains = <&rpmpd SM6125_VDDCX>; > + > + phys = <&mdss_dsi0_phy>; > + phy-names = "dsi"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + mdss_dsi0_in: endpoint { > + remote-endpoint = <&dpu_intf1_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + mdss_dsi0_out: endpoint { > + }; > + }; > + }; > + > + dsi_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-164000000 { > + opp-hz = /bits/ 64 <164000000>; > + required-opps = <&rpmpd_opp_low_svs>; > + }; > + > + opp-187500000 { > + opp-hz = /bits/ 64 <187500000>; > + required-opps = <&rpmpd_opp_svs>; > + }; > + }; > + }; > + > + mdss_dsi0_phy: phy@5e94400 { > + compatible = "qcom,sm6125-dsi-phy-14nm"; > + reg = <0x05e94400 0x100>, > + <0x05e94500 0x300>, > + <0x05e94800 0x188>; > + reg-names = "dsi_phy", > + "dsi_phy_lane", > + "dsi_pll"; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&rpmcc RPM_SMD_XO_CLK_SRC>; > + clock-names = "iface", > + "ref"; > + > + required-opps = <&rpmpd_opp_svs>; > + power-domains = <&rpmpd SM6125_VDDMX>; > + > + status = "disabled"; > + }; > + }; > + > dispcc: clock-controller@5f00000 { > compatible = "qcom,sm6125-dispcc"; > reg = <0x05f00000 0x20000>; > clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, > - <0>, > - <0>, > + <&mdss_dsi0_phy 0>, > + <&mdss_dsi0_phy 1>, > <0>, > <0>, > <0>, >