Re: [PATCH v5 1/1] drm/doc: Document DRM device reset expectations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 27.06.23 um 15:23 schrieb André Almeida:
Create a section that specifies how to deal with DRM device resets for
kernel and userspace drivers.

Acked-by: Pekka Paalanen <pekka.paalanen@xxxxxxxxxxxxx>
Signed-off-by: André Almeida <andrealmeid@xxxxxxxxxx>
---

v4: https://lore.kernel.org/lkml/20230626183347.55118-1-andrealmeid@xxxxxxxxxx/

Changes:
  - Grammar fixes (Randy)

  Documentation/gpu/drm-uapi.rst | 68 ++++++++++++++++++++++++++++++++++
  1 file changed, 68 insertions(+)

diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst
index 65fb3036a580..3cbffa25ed93 100644
--- a/Documentation/gpu/drm-uapi.rst
+++ b/Documentation/gpu/drm-uapi.rst
@@ -285,6 +285,74 @@ for GPU1 and GPU2 from different vendors, and a third handler for
  mmapped regular files. Threads cause additional pain with signal
  handling as well.
+Device reset
+============
+
+The GPU stack is really complex and is prone to errors, from hardware bugs,
+faulty applications and everything in between the many layers. Some errors
+require resetting the device in order to make the device usable again. This
+sections describes the expectations for DRM and usermode drivers when a
+device resets and how to propagate the reset status.
+
+Kernel Mode Driver
+------------------
+
+The KMD is responsible for checking if the device needs a reset, and to perform
+it as needed. Usually a hang is detected when a job gets stuck executing. KMD
+should keep track of resets, because userspace can query any time about the
+reset stats for an specific context.

Maybe drop the part "for a specific context". Essentially the reset query could use global counters instead and we won't need the context any more here.

Apart from that this sounds good to me, feel free to add my rb.

Regards,
Christian.

  This is needed to propagate to the rest of
+the stack that a reset has happened. Currently, this is implemented by each
+driver separately, with no common DRM interface.
+
+User Mode Driver
+----------------
+
+The UMD should check before submitting new commands to the KMD if the device has
+been reset, and this can be checked more often if the UMD requires it. After
+detecting a reset, UMD will then proceed to report it to the application using
+the appropriate API error code, as explained in the section below about
+robustness.
+
+Robustness
+----------
+
+The only way to try to keep an application working after a reset is if it
+complies with the robustness aspects of the graphical API that it is using.
+
+Graphical APIs provide ways to applications to deal with device resets. However,
+there is no guarantee that the app will use such features correctly, and the
+UMD can implement policies to close the app if it is a repeating offender,
+likely in a broken loop. This is done to ensure that it does not keep blocking
+the user interface from being correctly displayed. This should be done even if
+the app is correct but happens to trigger some bug in the hardware/driver.
+
+OpenGL
+~~~~~~
+
+Apps using OpenGL should use the available robust interfaces, like the
+extension ``GL_ARB_robustness`` (or ``GL_EXT_robustness`` for OpenGL ES). This
+interface tells if a reset has happened, and if so, all the context state is
+considered lost and the app proceeds by creating new ones. If it is possible to
+determine that robustness is not in use, the UMD will terminate the app when a
+reset is detected, giving that the contexts are lost and the app won't be able
+to figure this out and recreate the contexts.
+
+Vulkan
+~~~~~~
+
+Apps using Vulkan should check for ``VK_ERROR_DEVICE_LOST`` for submissions.
+This error code means, among other things, that a device reset has happened and
+it needs to recreate the contexts to keep going.
+
+Reporting causes of resets
+--------------------------
+
+Apart from propagating the reset through the stack so apps can recover, it's
+really useful for driver developers to learn more about what caused the reset in
+first place. DRM devices should make use of devcoredump to store relevant
+information about the reset, so this information can be added to user bug
+reports.
+
  .. _drm_driver_ioctl:
IOCTL Support on Device Nodes




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux