On 2023-06-24 03:43:21, Konrad Dybcio wrote:
> On 24.06.2023 02:40, Marijn Suijten wrote:
> > This node has always resided in the wrong spot, making it somewhat
> > harder to contribute new node entries while maintaining proper sorting
> > around it. Move the node up to sit after hsusb_phy1 where it maintains
> > proper numerial
> numerical
Thanks.
> sorting on the (first of its many) reg address property.
Why was this continuation of the line not re-quoted? Makes your reply
super-hard to read.
- Marijn
> >
> > Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
> > Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> > ---
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>
> Konrad
> > arch/arm64/boot/dts/qcom/sm6125.dtsi | 38 ++++++++++++++++++------------------
> > 1 file changed, 19 insertions(+), 19 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> > index a596baa6ce3e..722dde560bec 100644
> > --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> > @@ -679,6 +679,24 @@ hsusb_phy1: phy@1613000 {
> > status = "disabled";
> > };
> >
> > + spmi_bus: spmi@1c40000 {
> > + compatible = "qcom,spmi-pmic-arb";
> > + reg = <0x01c40000 0x1100>,
> > + <0x01e00000 0x2000000>,
> > + <0x03e00000 0x100000>,
> > + <0x03f00000 0xa0000>,
> > + <0x01c0a000 0x26000>;
> > + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> > + interrupt-names = "periph_irq";
> > + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> > + qcom,ee = <0>;
> > + qcom,channel = <0>;
> > + #address-cells = <2>;
> > + #size-cells = <0>;
> > + interrupt-controller;
> > + #interrupt-cells = <4>;
> > + };
> > +
> > rpm_msg_ram: sram@45f0000 {
> > compatible = "qcom,rpm-msg-ram";
> > reg = <0x045f0000 0x7000>;
> > @@ -1184,27 +1202,9 @@ sram@4690000 {
> > reg = <0x04690000 0x10000>;
> > };
> >
> > - spmi_bus: spmi@1c40000 {
> > - compatible = "qcom,spmi-pmic-arb";
> > - reg = <0x01c40000 0x1100>,
> > - <0x01e00000 0x2000000>,
> > - <0x03e00000 0x100000>,
> > - <0x03f00000 0xa0000>,
> > - <0x01c0a000 0x26000>;
> > - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> > - interrupt-names = "periph_irq";
> > - interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> > - qcom,ee = <0>;
> > - qcom,channel = <0>;
> > - #address-cells = <2>;
> > - #size-cells = <0>;
> > - interrupt-controller;
> > - #interrupt-cells = <4>;
> > - };
> > -
> > apps_smmu: iommu@c600000 {
> > compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
> > - reg = <0xc600000 0x80000>;
> > + reg = <0x0c600000 0x80000>;
> > interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
> > <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
> > <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
> >
