There is little point in having a separate field with the name in the
sub-block info. Ryan pointed out that some (most) of of sub-blocks do
not even fill this field. The handling code also usually knows, which
sub-block it is now looking at.
Drop the unused field completely.
Suggested-by: Ryan McCann <quic_rmccann@xxxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 8 ++++----
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 2 --
2 files changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 4a99144a5a85..d4a5b18d4dae 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -253,9 +253,9 @@ static const uint32_t wb2_formats[] = {
.maxdwnscale = MAX_DOWNSCALE_RATIO, \
.maxupscale = MAX_UPSCALE_RATIO, \
.smart_dma_priority = sdma_pri, \
- .scaler_blk = {.name = STRCAT("sspp_scaler", num), \
+ .scaler_blk = { \
.base = 0xa00, .len = 0xa0,}, \
- .csc_blk = {.name = STRCAT("sspp_csc", num), \
+ .csc_blk = { \
.base = 0x1a00, .len = 0x100,}, \
.format_list = plane_formats_yuv, \
.num_formats = ARRAY_SIZE(plane_formats_yuv), \
@@ -269,9 +269,9 @@ static const uint32_t wb2_formats[] = {
.maxdwnscale = MAX_DOWNSCALE_RATIO, \
.maxupscale = MAX_UPSCALE_RATIO, \
.smart_dma_priority = sdma_pri, \
- .scaler_blk = {.name = STRCAT("sspp_scaler", num), \
+ .scaler_blk = { \
.base = 0xa00, .len = 0xa0,}, \
- .csc_blk = {.name = STRCAT("sspp_csc", num), \
+ .csc_blk = { \
.base = 0x1a00, .len = 0x100,}, \
.format_list = plane_formats_yuv, \
.num_formats = ARRAY_SIZE(plane_formats_yuv), \
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index bf7a525206ee..a102a8b0f8e1 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -273,13 +273,11 @@ enum {
/**
* MACRO DPU_HW_SUBBLK_INFO - information of HW sub-block inside DPU
- * @name: string name for debug purposes
* @base: offset of this sub-block relative to the block
* offset
* @len register block length of this sub-block
*/
#define DPU_HW_SUBBLK_INFO \
- char name[DPU_HW_BLK_NAME_LEN]; \
u32 base; \
u32 len
--
2.39.2
