On Thu, Jun 22, 2023 at 12:54:56AM +0300, Alexandru Ardelean wrote: > From: Yannick Fertre <yannick.fertre@xxxxxxxxxxx> > > Add documentation for new default-brightness-level property. Why? > > Signed-off-by: Yannick Fertre <yannick.fertre@xxxxxxxxxxx> > Signed-off-by: Alexandru Ardelean <alex@xxxxxxxxxxx> > --- > > Link to original patch: > https://github.com/STMicroelectronics/linux/commit/c4067d7bd883c6fa14ffd49892c4ce663cdafe98 > > Changelog v1 -> v2: > * https://lore.kernel.org/dri-devel/20230519200520.10657-2-alex@xxxxxxxxxxx/ > * removed 'brightness-levels' reference > * updated doc-text for 'default-brightness-level' > * updated doc-text for 'default-on' > * added 'minimum' & 'maximum' to 'default-brightness-level' property > * removed 'Reviewed-by: Philippe CORNU <philippe.cornu@xxxxxxxxxxx>' as > requested > * patch is first in series of 2 patches (was second patch) > > .../bindings/leds/backlight/gpio-backlight.yaml | 14 +++++++++++++- > 1 file changed, 13 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml > index 584030b6b0b9..2da6552a207c 100644 > --- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml > +++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml > @@ -20,9 +20,21 @@ properties: > maxItems: 1 > > default-on: > - description: enable the backlight at boot. > + description: > + The default power state of the backlight at boot. > type: boolean > > + default-brightness-level: > + description: > + The default brightness level on device init. The value can be 0 or 1. > + If omitted, the value is 1. In the context of the "gpio-backlight" driver > + the effect of this setting will be that the backlight is on/off. > + The difference between this setting and "default-on" is that this handles > + brightness, while "default-on" handles the power setting of the device. What power setting? You only have 1 GPIO to control here which is 2 states. I fail to see why you need 6 possible states with all the combinations of 2 properties. > + $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 0 > + maximum: 1 > + > required: > - compatible > - gpios > -- > 2.40.1 >