Re: [PATCH V4 1/8] drivers/acpi: Add support for Wifi band RF mitigations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 6/21/2023 11:14 AM, Andrew Lunn wrote:
Do only ACPI based systems have:

    interference of relatively high-powered harmonics of the (G-)DDR
    memory clocks with local radio module frequency bands used by
    Wifi 6/6e/7."

Could Device Tree based systems not experience this problem?
They could, of course, but they'd need some other driver to change
_something_ in the system? I don't even know what this is doing
precisely under the hood in the ACPI BIOS
If you don't know what it is actually doing, it suggests the API is
not very well defined. Is there even enough details that ARM64 ACPI
BIOS could implement this?
I think there is enough details for this to happen. It's done
so that either the AML can natively behave as a consumer or a
driver can behave as a consumer.
+/**
+ * APIs needed by drivers/subsystems for contributing frequencies:
+ * During probe, check `wbrf_supported_producer` to see if WBRF is supported.
+ * If adding frequencies, then call `wbrf_add_exclusion` with the
+ * start and end points specified for the frequency ranges added.
+ * If removing frequencies, then call `wbrf_remove_exclusion` with
+ * start and end points specified for the frequency ranges added.
+ */
+bool wbrf_supported_producer(struct acpi_device *adev);
+int wbrf_add_exclusion(struct acpi_device *adev,
+		       struct wbrf_ranges_in *in);
+int wbrf_remove_exclusion(struct acpi_device *adev,
+			  struct wbrf_ranges_in *in);
Could struct device be used here, to make the API agnostic to where
the information is coming from? That would then allow somebody in the
future to implement a device tree based information provider.
That does make sense, and it wouldn't even be that much harder if we
assume in a given platform there's only one provider
That seems like a very reasonable assumption. It is theoretically
possible to build an ACPI + DT hybrid, but i've never seen it actually
done.

If an ARM64 ACPI BIOS could implement this, then i would guess the low
level bits would be solved, i guess jumping into the EL1
firmware. Putting DT on top instead should not be too hard.

	Andrew

To make life easier I'll ask whether we can include snippets of
the matching ASL for this first implementation as part of the
public ACPI spec that matches this code when we release it.




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux