Re: [Intel-xe] [PATCH 2/3] linux/bits.h: Add fixed-width GENMASK and BIT macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 20, 2023 at 05:55:19PM +0300, Andy Shevchenko wrote:
On Tue, Jun 20, 2023 at 05:47:34PM +0300, Jani Nikula wrote:
On Thu, 15 Jun 2023, Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:
> On Fri, May 12, 2023 at 02:45:19PM +0300, Jani Nikula wrote:
>> On Fri, 12 May 2023, Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:
>> > On Fri, May 12, 2023 at 02:25:18PM +0300, Jani Nikula wrote:
>> >> On Fri, 12 May 2023, Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:
>> >> > On Mon, May 08, 2023 at 10:14:02PM -0700, Lucas De Marchi wrote:
>> >> >> Add GENMASK_U32(), GENMASK_U16() and GENMASK_U8()  macros to create
>> >> >> masks for fixed-width types and also the corresponding BIT_U32(),
>> >> >> BIT_U16() and BIT_U8().
>> >> >
>> >> > Why?
>> >>
>> >> The main reason is that GENMASK() and BIT() size varies for 32/64 bit
>> >> builds.
>> >
>> > When needed GENMASK_ULL() can be used (with respective castings perhaps)
>> > and BIT_ULL(), no?
>>
>> How does that help with making them the same 32-bit size on both 32 and
>> 64 bit builds?
>
> 	u32 x = GENMASK();
> 	u64 y = GENMASK_ULL();
>
> No? Then use in your code either x or y. Note that I assume that the parameters
> to GENMASK*() are built-time constants. Is it the case for you?

What's wrong with wanting to define macros with specific size, depending
on e.g. hardware registers instead of build size?

Nothing, but I think the problem is smaller than it's presented.

not sure about big/small problem you are talking about. It's a problem
for when the *device* register is a 32b fixed width, which is
independent from the CPU you are running on. We also have registers that
are u16 and u64. Having fixed-width GENMASK and BIT helps avoiding
mistakes like below. Just to use one example, the diff below builds
fine on my 64b machine, yet it's obviously wrong:

$ git diff diff --git a/drivers/gpu/drm/i915/gt/intel_gt_mcr.c b/drivers/gpu/drm/i915/gt/intel_gt_mcr.c
	index 0b414eae1683..692a0ad9a768 100644
	--- a/drivers/gpu/drm/i915/gt/intel_gt_mcr.c
	+++ b/drivers/gpu/drm/i915/gt/intel_gt_mcr.c
	@@ -261,8 +261,8 @@ static u32 rw_with_mcr_steering_fw(struct intel_gt *gt,
			 * No need to save old steering reg value.
			 */
			intel_uncore_write_fw(uncore, MTL_MCR_SELECTOR,
	-                                     REG_FIELD_PREP(MTL_MCR_GROUPID, group) |
	-                                     REG_FIELD_PREP(MTL_MCR_INSTANCEID, instance) |
	+                                     FIELD_PREP(MTL_MCR_GROUPID, group) |
	+                                     FIELD_PREP(MTL_MCR_INSTANCEID, instance) |
					      (rw_flag == FW_REG_READ ? GEN11_MCR_MULTICAST : 0));
		} else if (GRAPHICS_VER(uncore->i915) >= 11) {
			mcr_mask = GEN11_MCR_SLICE_MASK | GEN11_MCR_SUBSLICE_MASK;
	diff --git a/drivers/gpu/drm/i915/gt/intel_gt_regs.h b/drivers/gpu/drm/i915/gt/intel_gt_regs.h
	index 718cb2c80f79..c42bc2900c6a 100644
	--- a/drivers/gpu/drm/i915/gt/intel_gt_regs.h
	+++ b/drivers/gpu/drm/i915/gt/intel_gt_regs.h
	@@ -80,8 +80,8 @@
	 #define   GEN11_MCR_SLICE_MASK                 GEN11_MCR_SLICE(0xf)
	 #define   GEN11_MCR_SUBSLICE(subslice)         (((subslice) & 0x7) << 24)
	 #define   GEN11_MCR_SUBSLICE_MASK              GEN11_MCR_SUBSLICE(0x7)
	-#define   MTL_MCR_GROUPID                      REG_GENMASK(11, 8)
	-#define   MTL_MCR_INSTANCEID                   REG_GENMASK(3, 0)
	+#define   MTL_MCR_GROUPID                      GENMASK(32, 8)
	+#define   MTL_MCR_INSTANCEID                   GENMASK(3, 0)
#define IPEIR_I965 _MMIO(0x2064)
	 #define IPEHR_I965                             _MMIO(0x2068)

If the driver didn't support 32b CPUs, this would even go unnoticed.

Lucas De Marchi

And there are already header for bitfields with a lot of helpers
for (similar) cases if not yours.

What would you use for printk format if you wanted to to print
GENMASK()?

%lu, no?

--
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux