The ST7789V LCD controller supports regular SPI wiring, as well as no Rx data line at all. The operating system needs to know whether it can read registers from the device or not. Let's detail this specific design possibility by bounding the spi-rx-bus-width property. Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> --- .../devicetree/bindings/display/panel/sitronix,st7789v.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml index 0ccf0487fd8e..a25df7e1df88 100644 --- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml @@ -29,6 +29,10 @@ properties: spi-cpha: true spi-cpol: true + spi-rx-bus-width: + minimum: 0 + maximum: 1 + required: - compatible - reg -- 2.34.1
