On Wed, May 24, 2023 at 04:05:03PM +0200, Julien Stephan wrote: > On Wed, May 24, 2023 at 11:45:30AM +0200, AngeloGioacchino Del Regno wrote: > > Il 24/05/23 10:30, Julien Stephan ha scritto: > > > From: Florian Sylvestre <fsylvestre@xxxxxxxxxxxx> > > > > > > This adds the bindings, for the MIPI CD-PHY module v0.5 embedded in > > > some Mediatek soc, such as the mt8365 > > > > > > Signed-off-by: Florian Sylvestre <fsylvestre@xxxxxxxxxxxx> > > > Signed-off-by: Julien Stephan <jstephan@xxxxxxxxxxxx> > > > --- > > > .../bindings/phy/mediatek,mt8365-csi-rx.yaml | 67 +++++++++++++++++++ > > > MAINTAINERS | 6 ++ > > > 2 files changed, 73 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml > > > new file mode 100644 > > > index 000000000000..a1bd96a98051 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml > > > @@ -0,0 +1,67 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +# Copyright (c) 2023 MediaTek, BayLibre > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Mediatek Sensor Interface MIPI CSI CD-PHY > > > + > > > +maintainers: > > > + - Julien Stephan <jstephan@xxxxxxxxxxxx> > > > + - Andy Hsieh <andy.hsieh@xxxxxxxxxxxx> > > > + > > > +description: > > > + The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2 > > > + receivers. The number of PHYs depends on the SoC model. > > > + Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only > > > + capable. > > > + > > > +properties: > > > + compatible: > > > + enum: > > > + - mediatek,mt8365-csi-rx > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + '#phy-cells': > > > + const: 0 > > > + > > > + mediatek,phy-type: > > > > Instead of declaring a phy-type here like this, can't we instead declare that in > > the phy cells, like we're doing with MTK TPHY and like other non-MediaTek PHYs are > > already doing? > > > > device { > > ... > > phys = <&csi0_rx PHY_TYPE_CDPHY>; > > ... > > } > > > > Regards, > > Angelo > > > > > > Hi Angelo, > > This is a hardware property that is not dynamic, so IMHO it doesn't make sense > to use phy argument for that. Why? Interrupt numbers are fixed hardware properties which go in arg cells. > Some driver already use a 'phy-type' > property (such as phy-cadence-torrent.yaml). > > I was thinking of using phy argument on future upgrade when driver will > support D-PHY and C-PHY modes so the phy user will be able to choose the > mode. Once you design the binding, you don't get to change it. Rob
