On Wed, May 03, 2023 at 01:19:31PM +1000, Dave Airlie wrote:
> >
> > >
> > >> > the GROUP until after the FIRMWARE, so this can't work, as it already
> > >> > will have included all the ones below, hence why I bracketed top and
> > >> > bottom with a group.
> > >>
> > >> well... that is something that can be adapted easily by using a 2 pass
> > >> approach, filtering out the list based on the groups.
> > >>
> > >> I agree that yours is simpler though. If we can rely on the
> > >> order produced by the compiler and we document the expectations of
> > >> MODULE_FIRMWARE_GROUP_ONLY_ONE, then I believe we can stay with the
> > >> simpler approach.
> > >>
> > >> Luis, any thoughts here?
> > >
> > >I see the Dracut code indicates that the order says now that you should
> > >put the preferred firmware last, and that seems to match most coding
> > >conventions, ie, new firmwares likely get added last, so it's a nice
> >
> > not all. i915 for example keeps it newest first so when attempting
> > multiple firmware versions it starts from the preferred version. It
> > will be harder to convert since it also uses a x-macro to make sure the
> > MODULE_FIRMWARE() and the the platform mapping are actually using the same
> > firmware.
> >
> > >coincidence. Will this always work? I don't know. But if you like to
> >
> > short answer: it depends if your compiler is gcc *and* -O2 is used
> > Longer debug ahead. Simple test with the expansion of MODULE_FIRMWARE
> > baked in:
> >
> > $ cat /tmp/a.c
> > static const __attribute__((section("__modinfo_manual"), used, aligned(1))) char foo[] = "modinfo_manual_foo";
> > static const __attribute__((section("__modinfo_manual"), used, aligned(1))) char bar[] = "modinfo_manual_bar";
> > $ gcc -c -o /tmp/a.o /tmp/a.c
> > $ objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual
> > $ strings /tmp/modinfo_manual
> > modinfo_manual_foo
> > modinfo_manual_bar
> >
> > However that doesn't match when building modules. In kmod:
> >
> > diff --git a/testsuite/module-playground/mod-simple.c b/testsuite/module-playground/mod-simple.c
> > index 503e4d8..6dd5771 100644
> > --- a/testsuite/module-playground/mod-simple.c
> > +++ b/testsuite/module-playground/mod-simple.c
> > @@ -30,3 +30,9 @@ module_exit(test_module_exit);
> >
> > MODULE_AUTHOR("Lucas De Marchi <lucas.demarchi@xxxxxxxxx>");
> > MODULE_LICENSE("GPL");
> > +
> > +
> > +static const char __UNIQUE_ID_firmware404[] __attribute__((__used__)) __attribute__((__section__("__modinfo_cpp"))) __attribute__((__aligned__(1))) = "modinfo_cpp_foo";
> > +static const char __UNIQUE_ID_firmware405[] __attribute__((__used__)) __attribute__((__section__("__modinfo_cpp"))) __attribute__((__aligned__(1))) = "modinfo_cpp_bar";
> >
> > $ make ....
> > $ objcopy -O binary --only-section=__modinfo_cpp testsuite/module-playground/mod-simple.ko /tmp/modinfo_cpp
> > $ strings /tmp/modinfo_cpp
> > modinfo_cpp_bar
> > modinfo_cpp_foo
> >
> > It doesn't seem to be ./scripts/Makefile.modfinal neither as it's also
> > inverted in testsuite/module-playground/mod-simple.o
> >
> > After checking the options passed to gcc, here is the "culprit": -O2
> >
> > $ gcc -c -o /tmp/a.o /tmp/a.c && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
> > modinfo_manual_foo
> > modinfo_manual_bar
> > $ gcc -O2 -c -o /tmp/a.o /tmp/a.c && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
> > modinfo_manual_bar
> > modinfo_manual_foo
> >
> > It seems anything but -O0 inverts the section.
> >
> > $ gcc --version
> > gcc (GCC) 12.2.1 20230201
> >
> > It doesn't match the behavior described in its man page though. Manually
> > specifying all the options that -O1 turns on doesn't invert it.
> >
> > $ gcc -fauto-inc-dec -fbranch-count-reg -fcombine-stack-adjustments \
> > -fcompare-elim -fcprop-registers -fdce -fdefer-pop -fdelayed-branch
> > -fdse -fforward-propagate -fguess-branch-probability -fif-conversion \
> > -fif-conversion2 -finline-functions-called-once -fipa-modref \
> > -fipa-profile -fipa-pure-const -fipa-reference -fipa-reference-addressable \
> > -fmerge-constants -fmove-loop-stores -fomit-frame-pointer -freorder-blocks \
> > -fshrink-wrap -fshrink-wrap-separate -fsplit-wide-types -fssa-backprop \
> > -fssa-phiopt -ftree-bit-ccp -ftree-ccp -ftree-ch -ftree-coalesce-vars \
> > -ftree-copy-prop -ftree-dce -ftree-dominator-opts -ftree-dse -ftree-forwprop \
> > -ftree-fre -ftree-phiprop -ftree-pta -ftree-scev-cprop -ftree-sink -ftree-slsr \
> > -ftree-sra -ftree-ter -funit-at-a-time -c -o /tmp/a.o /tmp/a.c \
> > && objcopy -O binary --only-section=__modinfo_manual /tmp/a.o /tmp/modinfo_manual && strings /tmp/modinfo_manual
> > cc1: warning: this target machine does not have delayed branches
> > modinfo_manual_foo
> > modinfo_manual_bar
> >
>
> Thanks Lucas,
>
> -ftoplevel-reorder is the one that does it, now that does mean how
> I've done it isn't going to be robust.
>
> I will reconsider but in order to keep backwards compat, it might be
> easier to add firmware groups as an explicit list, but also spit out
> the individual names, but not sure how clean this will end up on
> dracut side.
>
> I'll take a look at the other options, but it does seem like reworking
> dracut is going to be the harder end of this, esp if I still want to
> keep compat with older ones.
Hey Dave, just curious if there was going to be another follow up patch
for this or if it was already posted. I don't see it clearly so just
wanted to double check.
Luis
