Tear down DSC datapath* on encoder cleanup*
On 2023-05-15 14:25:28, Kuogee Hsieh wrote:
>
> Unset DSC_ACTIVE bit at dpu_hw_ctl_reset_intf_cfg_v1(),
> dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() functions
> to tear down DSC data path if DSC data path was setup previous.
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 43 +++++++++++++++++++++++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 7 +++++
> 2 files changed, 50 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index 5cae70e..ee999ce 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -1214,6 +1214,44 @@ static void dpu_encoder_virt_atomic_enable(struct drm_encoder *drm_enc,
> mutex_unlock(&dpu_enc->enc_lock);
> }
>
> +static void dpu_encoder_dsc_pipe_clr(struct dpu_encoder_virt *dpu_enc,
I'd have passed hw_ctl directly.
> + struct dpu_hw_dsc *hw_dsc,
> + struct dpu_hw_pingpong *hw_pp)
> +{
> + struct dpu_encoder_phys *cur_master = dpu_enc->cur_master;
> + struct dpu_hw_ctl *ctl;
> +
> + ctl = cur_master->hw_ctl;
> +
> + if (hw_dsc->ops.dsc_disable)
> + hw_dsc->ops.dsc_disable(hw_dsc);
> +
> + if (hw_pp->ops.disable_dsc)
> + hw_pp->ops.disable_dsc(hw_pp);
> +
> + if (hw_dsc->ops.dsc_bind_pingpong_blk)
> + hw_dsc->ops.dsc_bind_pingpong_blk(hw_dsc, PINGPONG_NONE);
> +
> + if (ctl->ops.update_pending_flush_dsc)
> + ctl->ops.update_pending_flush_dsc(ctl, hw_dsc->idx);
> +}
> +
> +static void dpu_encoder_unprep_dsc(struct dpu_encoder_virt *dpu_enc)
> +{
> + /* coding only for 2LM, 2enc, 1 dsc config */
> + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
> + struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC];
> + int i;
> +
> + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) {
> + hw_pp[i] = dpu_enc->hw_pp[i];
> + hw_dsc[i] = dpu_enc->hw_dsc[i];
> +
> + if (hw_pp[i] && hw_dsc[i])
> + dpu_encoder_dsc_pipe_clr(dpu_enc, hw_dsc[i], hw_pp[i]);
> + }
> +}
Define these two functions right above
dpu_encoder_helper_phys_cleanup(), or right next to
dpu_encoder_prep_dsc() and dpu_encoder_dsc_pipe_cfg(), intead of
splitting dpu_encoder_virt_atomic_{en,dis}able() at a random point in
this file.
> +
> static void dpu_encoder_virt_atomic_disable(struct drm_encoder *drm_enc,
> struct drm_atomic_state *state)
> {
> @@ -2090,6 +2128,9 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
> phys_enc->hw_pp->merge_3d->idx);
> }
>
> + if (dpu_enc->dsc)
> + dpu_encoder_unprep_dsc(dpu_enc);
> +
> intf_cfg.stream_sel = 0; /* Don't care value for video mode */
> intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
Here.
>
> @@ -2101,6 +2142,8 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
> if (phys_enc->hw_pp->merge_3d)
> intf_cfg.merge_3d = phys_enc->hw_pp->merge_3d->idx;
>
> + intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
Since this is assigned unconditionally, can you assign this right below
where intf_cfg.mode_3d is assigned so that we have a static and a
conditional part?
> +
> if (ctl->ops.reset_intf_cfg)
> ctl->ops.reset_intf_cfg(ctl, &intf_cfg);
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index f3a50cc..aec3b08 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -577,6 +577,7 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> u32 intf_active = 0;
> u32 wb_active = 0;
> u32 merge3d_active = 0;
> + u32 dsc_active;
Any idea why the others are zero-assigned above for no reason (no need
to clean that up in this patch)?
>
> /*
> * This API resets each portion of the CTL path namely,
> @@ -606,6 +607,12 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> wb_active &= ~BIT(cfg->wb - WB_0);
> DPU_REG_WRITE(c, CTL_WB_ACTIVE, wb_active);
> }
> +
> + if (cfg->dsc) {
> + dsc_active = DPU_REG_READ(c, CTL_DSC_ACTIVE);
Do we really need to read it back? dpu_hw_ctl_intf_cfg_v1() doesn't
read it back either and plainly writes cfg->dsc. If we always have a
complete overview of what DSC's are enabled/active for this CTL (which
we have), this could just be written to 0.
But let's leave that now and discuss this separately, as the above does
the same for merge_3d, intf and wb.
- Marijn
> + dsc_active &= ~cfg->dsc;
> + DPU_REG_WRITE(c, CTL_DSC_ACTIVE, dsc_active);
> + }
> }
>
> static void dpu_hw_ctl_set_fetch_pipe_active(struct dpu_hw_ctl *ctx,
> --
> 2.7.4
>
