[PATCH v2 2/2] phy: mtk-mipi-csi: add driver for CSI phy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Phi-bang Nguyen <pnguyen@xxxxxxxxxxxx>

This is a new driver that supports the MIPI CSI CD-PHY version 0.5

The number of PHYs depend on the soc.

Signed-off-by: Louis Kuo <louis.kuo@xxxxxxxxxxxx>
Signed-off-by: Phi-bang Nguyen <pnguyen@xxxxxxxxxxxx>
[Julien Stephan: use GENMASK]
[Julien Stephan: refactor code]
[Julien Stephan: update device tree support and probe function]
Co-developed-by: Julien Stephan <jstephan@xxxxxxxxxxxx>
Signed-off-by: Julien Stephan <jstephan@xxxxxxxxxxxx>
---
 MAINTAINERS                                   |   1 +
 drivers/phy/mediatek/Kconfig                  |   8 +
 drivers/phy/mediatek/Makefile                 |   2 +
 .../mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h    |  58 ++++
 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c   | 257 ++++++++++++++++++
 5 files changed, 326 insertions(+)
 create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h
 create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 44f0ff11e984..fc2766cb50d3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13103,6 +13103,7 @@ M:	Julien Stephan <jstephan@xxxxxxxxxxxx>
 M:	Andy Hsieh <andy.hsieh@xxxxxxxxxxxx>
 S:	Supported
 F:	Documentation/devicetree/bindings/phy/mediatek,phy-mipi-csi-0-5.yaml
+F:	drivers/phy/mediatek/phy-mtk-mipi-csi-0-5*
 
 MEDIATEK MMC/SD/SDIO DRIVER
 M:	Chaotian Jing <chaotian.jing@xxxxxxxxxxxx>
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
index 3125ecb5d119..452bc7ac5ce5 100644
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -74,3 +74,11 @@ config PHY_MTK_DP
 	select GENERIC_PHY
 	help
 	  Support DisplayPort PHY for MediaTek SoCs.
+
+config PHY_MTK_MIPI_CSI_0_5
+	tristate "MediaTek CSI CD-PHY v 0.5 Driver"
+	depends on ARCH_MEDIATEK && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the MIPI CSI CD-PHY receiver version 0.5.
+	  The driver supports multiple CSI cdphy ports simultaneously.
diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
index fb1f8edaffa7..8eb7b8747c67 100644
--- a/drivers/phy/mediatek/Makefile
+++ b/drivers/phy/mediatek/Makefile
@@ -18,3 +18,5 @@ phy-mtk-mipi-dsi-drv-y			:= phy-mtk-mipi-dsi.o
 phy-mtk-mipi-dsi-drv-y			+= phy-mtk-mipi-dsi-mt8173.o
 phy-mtk-mipi-dsi-drv-y			+= phy-mtk-mipi-dsi-mt8183.o
 obj-$(CONFIG_PHY_MTK_MIPI_DSI)		+= phy-mtk-mipi-dsi-drv.o
+
+obj-$(CONFIG_PHY_MTK_MIPI_CSI_0_5)	+= phy-mtk-mipi-csi-0-5.o
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h
new file mode 100644
index 000000000000..e9a7f1ab3e2f
--- /dev/null
+++ b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __PHY_MTK__MIPI_CSI__C_0_5_RX_REG_H__
+#define __PHY_MTK__MIPI_CSI__C_0_5_RX_REG_H__
+
+/*
+ * CSI1 and CSI2 are identical, and similar to CSI0. All CSIx macros are
+ * applicable to the three PHYs. Where differences exist, they are denoted by
+ * macro names using CSI0 and CSI1, the latter being applicable to CSI1 and
+ * CSI2 alike.
+ */
+
+#define MIPI_RX_ANA00_CSIxA			0x0000
+#define RG_CSI0A_CPHY_EN			BIT(0)
+#define RG_CSIxA_EQ_PROTECT_EN			BIT(1)
+#define RG_CSIxA_BG_LPF_EN			BIT(2)
+#define RG_CSIxA_BG_CORE_EN			BIT(3)
+#define RG_CSIxA_DPHY_L0_CKMODE_EN		BIT(5)
+#define RG_CSIxA_DPHY_L0_CKSEL			BIT(6)
+#define RG_CSIxA_DPHY_L1_CKMODE_EN		BIT(8)
+#define RG_CSIxA_DPHY_L1_CKSEL			BIT(9)
+#define RG_CSIxA_DPHY_L2_CKMODE_EN		BIT(11)
+#define RG_CSIxA_DPHY_L2_CKSEL			BIT(12)
+
+#define MIPI_RX_ANA18_CSIxA			0x0018
+#define RG_CSI0A_L0_T0AB_EQ_IS			GENMASK(5, 4)
+#define RG_CSI0A_L0_T0AB_EQ_BW			GENMASK(7, 6)
+#define RG_CSI0A_L1_T1AB_EQ_IS			GENMASK(21, 20)
+#define RG_CSI0A_L1_T1AB_EQ_BW			GENMASK(23, 22)
+#define RG_CSI0A_L2_T1BC_EQ_IS			GENMASK(21, 20)
+#define RG_CSI0A_L2_T1BC_EQ_BW			GENMASK(23, 22)
+#define RG_CSI1A_L0_EQ_IS			GENMASK(5, 4)
+#define RG_CSI1A_L0_EQ_BW			GENMASK(7, 6)
+#define RG_CSI1A_L1_EQ_IS			GENMASK(21, 20)
+#define RG_CSI1A_L1_EQ_BW			GENMASK(23, 22)
+#define RG_CSI1A_L2_EQ_IS			GENMASK(5, 4)
+#define RG_CSI1A_L2_EQ_BW			GENMASK(7, 6)
+
+#define MIPI_RX_ANA1C_CSIxA			0x001c
+#define MIPI_RX_ANA20_CSI0A			0x0020
+
+#define MIPI_RX_ANA24_CSIxA			0x0024
+#define RG_CSIxA_RESERVE			GENMASK(31, 24)
+
+#define MIPI_RX_ANA40_CSIxA			0x0040
+#define RG_CSIxA_CPHY_FMCK_SEL			GENMASK(1, 0)
+#define RG_CSIxA_ASYNC_OPTION			GENMASK(7, 4)
+#define RG_CSIxA_CPHY_SPARE			GENMASK(31, 16)
+
+#define MIPI_RX_WRAPPER80_CSIxA			0x0080
+#define CSR_CSI_RST_MODE			GENMASK(17, 16)
+
+#define MIPI_RX_ANAA8_CSIxA			0x00a8
+#define RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT	BIT(0)
+#define RG_CSIxA_DPHY_L1_BYTECK_INVERT		BIT(1)
+#define RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT	BIT(2)
+
+#endif
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
new file mode 100644
index 000000000000..ae2d3dc9631d
--- /dev/null
+++ b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "phy-mtk-io.h"
+#include "phy-mtk-mipi-csi-0-5-rx-reg.h"
+
+#define CSIxB_OFFSET		0x1000
+
+struct mtk_mipi_dphy;
+
+struct mtk_mipi_dphy_port {
+	struct device *dev;
+	void __iomem *base;
+	struct phy *phy;
+	bool is_cdphy;
+};
+
+static int mtk_mipi_phy_power_on(struct phy *phy)
+{
+	struct mtk_mipi_dphy_port *port = phy_get_drvdata(phy);
+	void __iomem *base = port->base;
+
+	/*
+	 * Only DPHY is supported for now,
+	 * so set analog phy mode to DPHY in CDPHY compatible PHYs
+	 */
+	if (port->is_cdphy) {
+		mtk_phy_update_field(base + MIPI_RX_ANA00_CSIxA,
+				     RG_CSI0A_CPHY_EN, 0);
+		mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA00_CSIxA,
+				     RG_CSI0A_CPHY_EN, 0);
+	}
+
+	/*
+	 * Lane configuration:
+	 *
+	 * Only 4 data + 1 clock is supported for now with the following mapping:
+	 *
+	 * CSIxA_LNR0 --> D2
+	 * CSIxA_LNR1 --> D0
+	 * CSIxA_LNR2 --> C
+	 * CSIxB_LNR0 --> D1
+	 * CSIxB_LNR1 --> D3
+	 */
+	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_DPHY_L0_CKMODE_EN, 0);
+	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_DPHY_L0_CKSEL, 1);
+	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_DPHY_L1_CKMODE_EN, 0);
+	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_DPHY_L1_CKSEL, 1);
+	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_DPHY_L2_CKMODE_EN, 1);
+	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_DPHY_L2_CKSEL, 1);
+
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_DPHY_L0_CKMODE_EN, 0);
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_DPHY_L0_CKSEL, 1);
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_DPHY_L1_CKMODE_EN, 0);
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_DPHY_L1_CKSEL, 1);
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_DPHY_L2_CKMODE_EN, 0);
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_DPHY_L2_CKSEL, 1);
+
+	/* Byte clock invert */
+	mtk_phy_update_field(base + MIPI_RX_ANAA8_CSIxA,
+			     RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT, 1);
+	mtk_phy_update_field(base + MIPI_RX_ANAA8_CSIxA,
+			     RG_CSIxA_DPHY_L1_BYTECK_INVERT, 1);
+	mtk_phy_update_field(base + MIPI_RX_ANAA8_CSIxA,
+			     RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT, 1);
+
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANAA8_CSIxA,
+			     RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT, 1);
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANAA8_CSIxA,
+			     RG_CSIxA_DPHY_L1_BYTECK_INVERT, 1);
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANAA8_CSIxA,
+			     RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT, 1);
+
+	/* Start ANA EQ tuning */
+	if (port->is_cdphy) {
+		mtk_phy_update_field(base + MIPI_RX_ANA18_CSIxA,
+				     RG_CSI0A_L0_T0AB_EQ_IS, 1);
+		mtk_phy_update_field(base + MIPI_RX_ANA18_CSIxA,
+				     RG_CSI0A_L0_T0AB_EQ_BW, 1);
+		mtk_phy_update_field(base + MIPI_RX_ANA1C_CSIxA,
+				     RG_CSI0A_L1_T1AB_EQ_IS, 1);
+		mtk_phy_update_field(base + MIPI_RX_ANA1C_CSIxA,
+				     RG_CSI0A_L1_T1AB_EQ_BW, 1);
+		mtk_phy_update_field(base + MIPI_RX_ANA20_CSI0A,
+				     RG_CSI0A_L2_T1BC_EQ_IS, 1);
+		mtk_phy_update_field(base + MIPI_RX_ANA20_CSI0A,
+				     RG_CSI0A_L2_T1BC_EQ_BW, 1);
+
+		mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA18_CSIxA,
+				     RG_CSI0A_L0_T0AB_EQ_IS, 1);
+		mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA18_CSIxA,
+				     RG_CSI0A_L0_T0AB_EQ_BW, 1);
+		mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA1C_CSIxA,
+				     RG_CSI0A_L1_T1AB_EQ_IS, 1);
+		mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA1C_CSIxA,
+				     RG_CSI0A_L1_T1AB_EQ_BW, 1);
+		mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA20_CSI0A,
+				     RG_CSI0A_L2_T1BC_EQ_IS, 1);
+		mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA20_CSI0A,
+				     RG_CSI0A_L2_T1BC_EQ_BW, 1);
+	} else {
+		mtk_phy_update_field(base + MIPI_RX_ANA18_CSIxA,
+				     RG_CSI1A_L0_EQ_IS, 1);
+		mtk_phy_update_field(base + MIPI_RX_ANA18_CSIxA,
+				     RG_CSI1A_L0_EQ_BW, 1);
+		mtk_phy_update_field(base + MIPI_RX_ANA18_CSIxA,
+				     RG_CSI1A_L1_EQ_IS, 1);
+		mtk_phy_update_field(base + MIPI_RX_ANA18_CSIxA,
+				     RG_CSI1A_L1_EQ_BW, 1);
+		mtk_phy_update_field(base + MIPI_RX_ANA1C_CSIxA,
+				     RG_CSI1A_L2_EQ_IS, 1);
+		mtk_phy_update_field(base + MIPI_RX_ANA1C_CSIxA,
+				     RG_CSI1A_L2_EQ_BW, 1);
+
+		mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA18_CSIxA,
+				     RG_CSI1A_L0_EQ_IS, 1);
+		mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA18_CSIxA,
+				     RG_CSI1A_L0_EQ_BW, 1);
+		mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA18_CSIxA,
+				     RG_CSI1A_L1_EQ_IS, 1);
+		mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA18_CSIxA,
+				     RG_CSI1A_L1_EQ_BW, 1);
+		mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA1C_CSIxA,
+				     RG_CSI1A_L2_EQ_IS, 1);
+		mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA1C_CSIxA,
+				     RG_CSI1A_L2_EQ_BW, 1);
+	}
+
+	/* End ANA EQ tuning */
+	mtk_phy_set_bits(base + MIPI_RX_ANA40_CSIxA, 0x90);
+
+	mtk_phy_update_field(base + MIPI_RX_ANA24_CSIxA,
+			     RG_CSIxA_RESERVE, 0x40);
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA24_CSIxA,
+			     RG_CSIxA_RESERVE, 0x40);
+	mtk_phy_update_field(base + MIPI_RX_WRAPPER80_CSIxA,
+			     CSR_CSI_RST_MODE, 0);
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_WRAPPER80_CSIxA,
+			     CSR_CSI_RST_MODE, 0);
+	/* ANA power on */
+	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_BG_CORE_EN, 1);
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_BG_CORE_EN, 1);
+	usleep_range(20, 40);
+	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_BG_LPF_EN, 1);
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_BG_LPF_EN, 1);
+
+	return 0;
+}
+
+static int mtk_mipi_phy_power_off(struct phy *phy)
+{
+	struct mtk_mipi_dphy_port *port = phy_get_drvdata(phy);
+	void __iomem *base = port->base;
+
+	/* Disable MIPI BG. */
+	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_BG_CORE_EN, 0);
+	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_BG_LPF_EN, 0);
+
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_BG_CORE_EN, 0);
+	mtk_phy_update_field(base + CSIxB_OFFSET + MIPI_RX_ANA00_CSIxA,
+			     RG_CSIxA_BG_LPF_EN, 0);
+
+	return 0;
+}
+
+static const struct phy_ops mtk_dphy_ops = {
+	.power_on	= mtk_mipi_phy_power_on,
+	.power_off	= mtk_mipi_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int mtk_mipi_dphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct mtk_mipi_dphy_port *port;
+	struct phy *phy;
+
+	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, port);
+
+	port->dev = dev;
+
+	port->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(port->base))
+		return PTR_ERR(port->base);
+
+	port->is_cdphy = of_property_read_bool(dev->of_node, "mediatek,is_cdphy");
+
+	phy = devm_phy_create(dev, NULL, &mtk_dphy_ops);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "Failed to create PHY: %ld\n", PTR_ERR(phy));
+		return PTR_ERR(phy);
+	}
+
+	port->phy = phy;
+	phy_set_drvdata(phy, port);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		dev_err(dev, "Failed to register PHY provider: %ld\n",
+			PTR_ERR(phy_provider));
+		return PTR_ERR(phy_provider);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id mtk_mipi_dphy_of_match[] = {
+	{.compatible = "mediatek,phy-mipi-csi-0-5"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtk_mipi_dphy_of_match);
+
+static struct platform_driver mipi_dphy_pdrv = {
+	.probe = mtk_mipi_dphy_probe,
+	.driver	= {
+		.name	= "mtk-mipi-csi-0-5",
+		.of_match_table = mtk_mipi_dphy_of_match,
+	},
+};
+
+module_platform_driver(mipi_dphy_pdrv);
+
+MODULE_DESCRIPTION("MTK mipi csi cdphy driver");
+MODULE_AUTHOR("Louis Kuo <louis.kuo@xxxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
-- 
2.40.0




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux