From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Use new DRM DSC helpers to setup DSI DSC configuration. The initial_scale_value needs to be adjusted according to the standard, but this is a separate change. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Reviewed-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx> --- drivers/gpu/drm/msm/dsi/dsi_host.c | 61 +++++--------------------------------- 1 file changed, 8 insertions(+), 53 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 961689a255c4..74d38f90398a 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -1731,28 +1731,9 @@ static int dsi_host_parse_lane_data(struct msm_dsi_host *msm_host, return -EINVAL; } -static u32 dsi_dsc_rc_buf_thresh[DSC_NUM_BUF_RANGES - 1] = { - 0x0e, 0x1c, 0x2a, 0x38, 0x46, 0x54, 0x62, - 0x69, 0x70, 0x77, 0x79, 0x7b, 0x7d, 0x7e -}; - -/* only 8bpc, 8bpp added */ -static char min_qp[DSC_NUM_BUF_RANGES] = { - 0, 0, 1, 1, 3, 3, 3, 3, 3, 3, 5, 5, 5, 7, 13 -}; - -static char max_qp[DSC_NUM_BUF_RANGES] = { - 4, 4, 5, 6, 7, 7, 7, 8, 9, 10, 11, 12, 13, 13, 15 -}; - -static char bpg_offset[DSC_NUM_BUF_RANGES] = { - 2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12 -}; - static int dsi_populate_dsc_params(struct msm_dsi_host *msm_host, struct drm_dsc_config *dsc) { - int i; - u16 bpp = dsc->bits_per_pixel >> 4; + int ret; if (dsc->bits_per_pixel & 0xf) { DRM_DEV_ERROR(&msm_host->pdev->dev, "DSI does not support fractional bits_per_pixel\n"); @@ -1764,49 +1745,23 @@ static int dsi_populate_dsc_params(struct msm_dsi_host *msm_host, struct drm_dsc return -EOPNOTSUPP; } - dsc->rc_model_size = 8192; - dsc->first_line_bpg_offset = 12; - dsc->rc_edge_factor = 6; - dsc->rc_tgt_offset_high = 3; - dsc->rc_tgt_offset_low = 3; dsc->simple_422 = 0; dsc->convert_rgb = 1; dsc->vbr_enable = 0; - /* handle only bpp = bpc = 8 */ - for (i = 0; i < DSC_NUM_BUF_RANGES - 1 ; i++) - dsc->rc_buf_thresh[i] = dsi_dsc_rc_buf_thresh[i]; + drm_dsc_set_const_params(dsc); + drm_dsc_set_rc_buf_thresh(dsc); - for (i = 0; i < DSC_NUM_BUF_RANGES; i++) { - dsc->rc_range_params[i].range_min_qp = min_qp[i]; - dsc->rc_range_params[i].range_max_qp = max_qp[i]; - /* - * Range BPG Offset contains two's-complement signed values that fill - * 8 bits, yet the registers and DCS PPS field are only 6 bits wide. - */ - dsc->rc_range_params[i].range_bpg_offset = bpg_offset[i] & DSC_RANGE_BPG_OFFSET_MASK; + /* handle only bpp = bpc = 8, pre-SCR panels */ + ret = drm_dsc_setup_rc_params(dsc, DRM_DSC_1_1_PRE_SCR); + if (ret) { + DRM_DEV_ERROR(&msm_host->pdev->dev, "could not find DSC RC parameters\n"); + return ret; } - dsc->initial_offset = 6144; /* Not bpp 12 */ - if (bpp != 8) - dsc->initial_offset = 2048; /* bpp = 12 */ - - if (dsc->bits_per_component <= 10) - dsc->mux_word_size = DSC_MUX_WORD_SIZE_8_10_BPC; - else - dsc->mux_word_size = DSC_MUX_WORD_SIZE_12_BPC; - - dsc->initial_xmit_delay = 512; dsc->initial_scale_value = 32; - dsc->first_line_bpg_offset = 12; dsc->line_buf_depth = dsc->bits_per_component + 1; - /* bpc 8 */ - dsc->flatness_min_qp = 3; - dsc->flatness_max_qp = 12; - dsc->rc_quant_incr_limit0 = 11; - dsc->rc_quant_incr_limit1 = 11; - return drm_dsc_compute_rc_parameters(dsc); } -- 2.40.1