On Fri, May 05, 2023 at 08:57:52PM +0200, Maximilian Weigand wrote: > From: Maximilian Weigand <mweigand@xxxxxxxxxxxx> > > Use display_is_blank() to determine if the led strings should be turned > off in the update_status() functions of both strings. > > Signed-off-by: Maximilian Weigand <mweigand@xxxxxxxxxxxx> > --- > drivers/video/backlight/lm3630a_bl.c | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c > index d8c42acecb5d..5498b57329f9 100644 > --- a/drivers/video/backlight/lm3630a_bl.c > +++ b/drivers/video/backlight/lm3630a_bl.c > @@ -202,7 +202,9 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl) > usleep_range(1000, 2000); > /* minimum brightness is 0x04 */ > ret = lm3630a_write(pchip, REG_BRT_A, bl->props.brightness); > - if (bl->props.brightness < 0x4) > + > + if (backlight_is_blank(bl) || (bl->props.brightness < 0x4)) You could replace bl->props.brightness with backlight_get_brightness(bl) to avoid direct access to the properties. > + /* turn the string off */ > ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDA_ENABLE, 0); > else > ret |= lm3630a_update(pchip, REG_CTRL, > @@ -277,7 +279,9 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl) > usleep_range(1000, 2000); > /* minimum brightness is 0x04 */ > ret = lm3630a_write(pchip, REG_BRT_B, bl->props.brightness); > - if (bl->props.brightness < 0x4) > + > + if (backlight_is_blank(bl) || (bl->props.brightness < 0x4)) Same here Sam
