This series adds support for the HDMI output on the msm8974 platform. It was tested on the apq8074 dragonboard device. I'm sending this as an RFC for two reasons: - The series depends on the other patchset ([1]), which got no feedback yet. - I'm looking at refactoring the HDMI PHY support. I tink it makes little sense to land the PHY driver when we know that it is going to be reworked during the same development cycle. [1] https://patchwork.freedesktop.org/series/117431/ Brian Masney (1): drm/msm/hdmi: add msm8974 PLL support Dmitry Baryshkov (2): ARM: dts: qcom: msm8974: add support for the HDMI output ARM: dts: qcom: apq8074-dragonboard: enable HDMI output .../arm/boot/dts/qcom-apq8074-dragonboard.dts | 30 + arch/arm/boot/dts/qcom-msm8974.dtsi | 90 ++- drivers/gpu/drm/msm/Makefile | 1 + drivers/gpu/drm/msm/hdmi/hdmi.h | 6 + drivers/gpu/drm/msm/hdmi/hdmi_phy.c | 4 +- drivers/gpu/drm/msm/hdmi/hdmi_pll_8974.c | 689 ++++++++++++++++++ 6 files changed, 818 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/msm/hdmi/hdmi_pll_8974.c -- 2.39.2