[PATCH 1/3] dt-bindings: display: hdmi-connector: add hdmi-pwr supply

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Follow the dp-connector example and add hdmi-pwr supply to drive the 5V
pin of the HDMI connector (together with some simple glue logic possibly
attached to the connector).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 .../devicetree/bindings/display/connector/hdmi-connector.yaml  | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
index 83c0d008265b..94f75359c6ff 100644
--- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
+++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
@@ -36,6 +36,9 @@ properties:
     description: GPIO signal to enable DDC bus
     maxItems: 1
 
+  hdmi-pwr-supply:
+    description: Power supply for the HDMI 5v pin connector
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description: Connection to controller providing HDMI signals
-- 
2.39.2




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux