Disable relay mode at the end of LUT programming to make sure that the processed image goes through. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> --- drivers/gpu/drm/mediatek/mtk_disp_gamma.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c index c8ccc38c5170..450da7062db4 100644 --- a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c +++ b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c @@ -20,6 +20,7 @@ #define DISP_GAMMA_EN 0x0000 #define GAMMA_EN BIT(0) #define DISP_GAMMA_CFG 0x0020 +#define GAMMA_RELAY_MODE BIT(0) #define GAMMA_LUT_EN BIT(1) #define GAMMA_DITHERING BIT(2) #define DISP_GAMMA_SIZE 0x0030 @@ -184,6 +185,9 @@ void mtk_gamma_set_common(struct device *dev, void __iomem *regs, struct drm_crt /* Enable the gamma table */ cfg_val |= FIELD_PREP(GAMMA_LUT_EN, 1); + /* Disable RELAY mode to pass the processed image */ + cfg_val &= ~GAMMA_RELAY_MODE; + writel(cfg_val, regs + DISP_GAMMA_CFG); } -- 2.40.1
