Re: [Freedreno] [PATCH v2 5/9] drm/msm/dpu: drop DPU_PLANE_QOS_VBLANK_CTRL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 5/2/2023 8:05 AM, Dmitry Baryshkov wrote:
Drop support for DPU_PLANE_QOS_VBLANK_CTRL flag. It is not used both
in upstream driver and in vendor SDE driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |  4 ----
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c    |  8 --------
  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c      | 10 ----------
  3 files changed, 22 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index b2831b45ac64..d47e7061a36b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -371,8 +371,6 @@ struct dpu_caps {
  /**
   * struct dpu_sspp_sub_blks : SSPP sub-blocks
   * common: Pointer to common configurations shared by sub blocks
- * @creq_vblank: creq priority during vertical blanking
- * @danger_vblank: danger priority during vertical blanking
   * @maxdwnscale: max downscale ratio supported(without DECIMATION)
   * @maxupscale:  maxupscale ratio supported
   * @smart_dma_priority: hw priority of rect1 of multirect pipe
@@ -387,8 +385,6 @@ struct dpu_caps {
   * @dpu_rotation_cfg: inline rotation configuration
   */
  struct dpu_sspp_sub_blks {
-	u32 creq_vblank;
-	u32 danger_vblank;
  	u32 maxdwnscale;
  	u32 maxupscale;
  	u32 smart_dma_priority;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
index 731199030336..b198def5534b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
@@ -697,14 +697,6 @@ int _dpu_hw_sspp_init_debugfs(struct dpu_hw_sspp *hw_pipe, struct dpu_kms *kms,
  			0400,
  			debugfs_root,
  			(u32 *) &cfg->clk_ctrl);
-	debugfs_create_x32("creq_vblank",
-			0600,
-			debugfs_root,
-			(u32 *) &sblk->creq_vblank);
-	debugfs_create_x32("danger_vblank",
-			0600,
-			debugfs_root,
-			(u32 *) &sblk->danger_vblank);
return 0;
  }
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 586f089756fa..3cb891917b65 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -73,13 +73,11 @@ static const uint32_t qcom_compressed_supported_formats[] = {
  /**
   * enum dpu_plane_qos - Different qos configurations for each pipe
   *
- * @DPU_PLANE_QOS_VBLANK_CTRL: Setup VBLANK qos for the pipe.
   * @DPU_PLANE_QOS_VBLANK_AMORTIZE: Enables Amortization within pipe.
   *	this configuration is mutually exclusive from VBLANK_CTRL.
   * @DPU_PLANE_QOS_PANIC_CTRL: Setup panic for the pipe.
   */
  enum dpu_plane_qos {
-	DPU_PLANE_QOS_VBLANK_CTRL = BIT(0),
  	DPU_PLANE_QOS_VBLANK_AMORTIZE = BIT(1),
  	DPU_PLANE_QOS_PANIC_CTRL = BIT(2),
  };
@@ -361,15 +359,7 @@ static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane,
memset(&pipe_qos_cfg, 0, sizeof(pipe_qos_cfg)); - if (flags & DPU_PLANE_QOS_VBLANK_CTRL) {
-		pipe_qos_cfg.creq_vblank = pipe->sspp->cap->sblk->creq_vblank;
-		pipe_qos_cfg.danger_vblank =
-				pipe->sspp->cap->sblk->danger_vblank;
-		pipe_qos_cfg.vblank_en = enable;
-	}
-
  	if (flags & DPU_PLANE_QOS_VBLANK_AMORTIZE) {
-		/* this feature overrules previous VBLANK_CTRL */
  		pipe_qos_cfg.vblank_en = false;
  		pipe_qos_cfg.creq_vblank = 0; /* clear vblank bits */
  	}
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux