On Mon, May 01, 2023 at 08:51:01PM +0200, Artur Weber wrote: > Add bindings for the S6D7AA0 LCD panel controller, including the > S6D7AA0-LSL080AL02 panel used in the Samsung Galaxy Tab 3 8.0 family > of tablets, and the S6D7AA0-LSL080AL03 and S6D7AA0-LTL101AT01 panels > used in the Samsung Galaxy Tab A 8.0 and 9.7 2015. > > Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx> > --- > Changed in v2: > - Updated commit message > - Applied suggestions from Krzysztof Kozlowski > Changed in v3: > - Correctly applied suggestions > Changed in v4: > - Added LSL080AL03, LTL101AT01 compatibles > - Added description to reset-gpios > - Added vmipi-supply, renamed enable-supply to power-supply > --- > .../display/panel/samsung,s6d7aa0.yaml | 68 +++++++++++++++++++ > 1 file changed, 68 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml > new file mode 100644 > index 000000000000..918f62a78ecd > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml > @@ -0,0 +1,68 @@ > +# SPDX-License-Identifier: GPL-2.0 Dual license please. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Samsung S6D7AA0 MIPI-DSI LCD panel controller > + > +maintainers: > + - Artur Weber <aweber.kernel@xxxxxxxxx> > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + enum: > + # 1280x800 LSL080AL02 panel > + - samsung,s6d7aa0-lsl080al02 > + # 1024x768 LSL080AL03 panel > + - samsung,s6d7aa0-lsl080al03 > + # 1024x768 LTL101AT01 panel > + - samsung,s6d7aa0-ltl101at01 > + > + reg: true > + > + backlight: > + description: | > + Backlight to use for the panel. If this property is set on panels > + that have DSI-based backlight control (LSL080AL03 and LTL101AT01), > + it overrides the DSI-based backlight. > + > + reset-gpios: > + description: Reset GPIO pin, usually GPIO_ACTIVE_LOW. > + > + power-supply: > + description: | > + Main power supply for the panel; the exact voltage differs between > + panels, and is usually somewhere around 3.3-5v. > + > + vmipi-supply: > + description: VMIPI supply, usually 1.8v. > + > +required: > + - compatible > + - reg > + - reset-gpios > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + dsi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + panel@0 { > + compatible = "samsung,s6d7aa0-lsl080al02"; > + reg = <0>; > + power-supply = <&display_3v3_supply>; > + reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>; > + backlight = <&backlight>; > + }; > + }; > + > +... > -- > 2.40.1 >
