On Tue, 2023-05-02 at 10:50 -0400, Tom Rix wrote:
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>
>
> gcc on aarch64 reports
> drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c: In function
> ‘mtk_hdmi_pll_set_rate’:
> drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c:240:52: error: ‘-mgeneral-
> regs-only’
> is incompatible with the use of floating-point types
> 240 | else if (tmds_clk >= 54 * MEGA && tmds_clk < 148.35 *
> MEGA)
>
> Floating point should not be used, so rework the floating point
> comparisons
> to fixed point.
>
> Signed-off-by: Tom Rix <trix@xxxxxxxxxx>
> ---
> v2: silence robot by casting types to u64
>
> ---
> drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> index abfc077fb0a8..093c4d1da557 100644
> --- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> +++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> @@ -237,11 +237,11 @@ static int mtk_hdmi_pll_calc(struct
> mtk_hdmi_phy *hdmi_phy, struct clk_hw *hw,
> */
> if (tmds_clk < 54 * MEGA)
> txposdiv = 8;
> - else if (tmds_clk >= 54 * MEGA && tmds_clk < 148.35 * MEGA)
> + else if (tmds_clk >= 54 * MEGA && (tmds_clk * 100) < 14835 *
> MEGA)
> txposdiv = 4;
> - else if (tmds_clk >= 148.35 * MEGA && tmds_clk < 296.7 *
> MEGA)
> + else if ((tmds_clk * 100) >= 14835 * MEGA && (tmds_clk * 10)
> < 2967 * MEGA)
> txposdiv = 2;
> - else if (tmds_clk >= 296.7 * MEGA && tmds_clk <= 594 * MEGA)
> + else if ((tmds_clk * 10) >= 2967 * MEGA && tmds_clk <= 594 *
> MEGA)
> txposdiv = 1;
> else
> return -EINVAL;
> @@ -328,12 +328,12 @@ static int mtk_hdmi_pll_drv_setting(struct
> clk_hw *hw)
> clk_channel_bias = 0x34; /* 20mA */
> impedance_en = 0xf;
> impedance = 0x36; /* 100ohm */
> - } else if (pixel_clk >= 74.175 * MEGA && pixel_clk <= 300 *
> MEGA) {
> + } else if (((u64)pixel_clk * 1000) >= 74175 * MEGA &&
> pixel_clk <= 300 * MEGA) {
> data_channel_bias = 0x34; /* 20mA */
> clk_channel_bias = 0x2c; /* 16mA */
> impedance_en = 0xf;
> impedance = 0x36; /* 100ohm */
> - } else if (pixel_clk >= 27 * MEGA && pixel_clk < 74.175 *
> MEGA) {
> + } else if (pixel_clk >= 27 * MEGA && ((u64)pixel_clk * 1000)
> < 74175 * MEGA) {
> data_channel_bias = 0x14; /* 10mA */
> clk_channel_bias = 0x14; /* 10mA */
> impedance_en = 0x0;
> --
> 2.27.0
Reviewed-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
Thanks
>
