Re: [PATCH 4/4] drm/msm/dpu: Enable compression for command mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2023-05-02 18:19:15, Jessica Zhang wrote:
> Add a dpu_hw_intf op to enable data compression.
> 
> Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 4 ++++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c          | 7 +++++++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h          | 2 ++
>  3 files changed, 13 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> index 74470d068622..4321a1aba17f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c

Can we have INTF DCE on video-mode encoders as well?

> @@ -72,6 +72,10 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
>  				phys_enc->hw_intf,
>  				true,
>  				phys_enc->hw_pp->idx);
> +
> +	if (phys_enc->dpu_kms->catalog->caps->has_data_compress &&

As per my suggestion on patch 3/4, drop the flag and check above and
only check if the function is NULL (below).

> +			phys_enc->hw_intf->ops.enable_compression)
> +		phys_enc->hw_intf->ops.enable_compression(phys_enc->hw_intf);
>  }
>  
>  static void dpu_encoder_phys_cmd_pp_tx_done_irq(void *arg, int irq_idx)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> index 671048a78801..4ce7ffdd7a05 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> @@ -64,10 +64,16 @@
>  
>  #define INTF_CFG2_DATABUS_WIDEN	BIT(0)
>  #define INTF_CFG2_DATA_HCTL_EN	BIT(4)

These should probably be reindented to match the below... And the rest
of the defines use spaces instead of tabs.

> +#define INTF_CFG2_DCE_DATA_COMPRESS	BIT(12)
>  
>  #define INTF_MISR_CTRL			0x180
>  #define INTF_MISR_SIGNATURE		0x184

This does not seem to apply on top of:
https://lore.kernel.org/linux-arm-msm/20230411-dpu-intf-te-v4-10-27ce1a5ab5c6@xxxxxxxxxxxxxx/

>  
> +static inline void dpu_hw_intf_enable_compression(struct dpu_hw_intf *ctx)

Why inline?  This is used as a pointer callback.

> +{
> +	DPU_REG_WRITE(&ctx->hw, INTF_CONFIG2, INTF_CFG2_DCE_DATA_COMPRESS);

dpu_hw_intf_setup_timing_engine() also programs INTF_CONFIG2.  Is it
double-buffered, or is that config **always** unused when DSI CMD mode
is used in conjunction with DSC/DCE?  Otherwise this should perhaps OR
the bitflag into the register, or write the whole thing at once in
dpu_hw_intf_setup_timing_engine()?

> +}
> +
>  static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
>  		const struct intf_timing_params *p,
>  		const struct dpu_format *fmt)
> @@ -325,6 +331,7 @@ static void _setup_intf_ops(struct dpu_hw_intf_ops *ops,
>  		ops->bind_pingpong_blk = dpu_hw_intf_bind_pingpong_blk;
>  	ops->setup_misr = dpu_hw_intf_setup_misr;
>  	ops->collect_misr = dpu_hw_intf_collect_misr;
> +	ops->enable_compression = dpu_hw_intf_enable_compression;

And per the same suggestion on patch 3/4, this is then wrapped in:

    if (cap & BIT(DPU_INTF_DATA_COMPRESS))

(or similary named) flag check.

>  }

This also doesn't seem to apply on top of the INTF TE [1] support
series, even though it depends on DSC 1.2 DPU support(s?) [2] which
mentions it was rebase(d) on top of that.

[1]: https://patchwork.freedesktop.org/series/112332/
[2]: https://patchwork.freedesktop.org/series/116789/

- Marijn

>  
>  struct dpu_hw_intf *dpu_hw_intf_init(const struct dpu_intf_cfg *cfg,
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
> index 102c4f0e812b..99528c735368 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
> @@ -60,6 +60,7 @@ struct intf_status {
>   *                     feed pixels to this interface
>   * @setup_misr: enable/disable MISR
>   * @collect_misr: read MISR signature
> + * @enable_compression: Enable data compression
>   */
>  struct dpu_hw_intf_ops {
>  	void (*setup_timing_gen)(struct dpu_hw_intf *intf,
> @@ -82,6 +83,7 @@ struct dpu_hw_intf_ops {
>  			const enum dpu_pingpong pp);
>  	void (*setup_misr)(struct dpu_hw_intf *intf, bool enable, u32 frame_count);
>  	int (*collect_misr)(struct dpu_hw_intf *intf, u32 *misr_value);
> +	void (*enable_compression)(struct dpu_hw_intf *intf);
>  };
>  
>  struct dpu_hw_intf {
> 
> -- 
> 2.40.1
> 



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux