On Tue, May 2, 2023 at 9:08 AM Adam Ford <aford173@xxxxxxxxx> wrote: > > This series fixes the blanking pack size and the PMS calculation. It then > adds support to allows the DSIM to dynamically DPHY clocks, and support > non-burst mode while allowing the removal of the hard-coded clock values > for the PLL for imx8m mini/nano/plus, and it allows the removal of the > burst-clock device tree entry when burst-mode isn't supported by connected > devices like an HDMI brige. In that event, the HS clock is set to the value > requested by the bridge chip. > > This has been tested on both an i.MX8M Nano and i.MX8M Plus, and should work > on i.MX8M Mini as well. > > Adam Ford (6): > drm: bridge: samsung-dsim: Fix PMS Calculator on imx8m[mnp] > drm: bridge: samsung-dsim: Fetch pll-clock-frequency automatically > drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY > drm: bridge: samsung-dsim: Dynamically configure DPHY timing > drm: bridge: samsung-dsim: Support non-burst mode > drm: bridge: samsung-dsim: Let blanking calcuation work in non-burst > mode > > Lucas Stach (1): > drm: bridge: samsung-dsim: fix blanking packet size calculation Still works, so whole series is Tested-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx> on i.MX8M Mini based Hummingboard Pulse.
