The blanking calculation currently uses burst_clk_rate for calculating the settings. Since it's possible to use this in non-burst mode, it's possible that where won't be burst_clk_rate. Instead, cache the clock rate configured from of samsung_dsim_set_pll and use it instead. Signed-off-by: Adam Ford <aford173@xxxxxxxxx> Tested-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx> --- drivers/gpu/drm/bridge/samsung-dsim.c | 4 +++- include/drm/bridge/samsung-dsim.h | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c index 53099461cdc2..1dc913db2cb3 100644 --- a/drivers/gpu/drm/bridge/samsung-dsim.c +++ b/drivers/gpu/drm/bridge/samsung-dsim.c @@ -652,6 +652,8 @@ static unsigned long samsung_dsim_set_pll(struct samsung_dsim *dsi, reg = samsung_dsim_read(dsi, DSIM_STATUS_REG); } while ((reg & DSIM_PLL_STABLE) == 0); + dsi->hs_clock = fout; + return fout; } @@ -960,7 +962,7 @@ static void samsung_dsim_set_display_mode(struct samsung_dsim *dsi) u32 reg; if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { - int byte_clk_khz = dsi->burst_clk_rate / 1000 / 8; + int byte_clk_khz = dsi->hs_clock / 1000 / 8; int hfp = (m->hsync_start - m->hdisplay) * byte_clk_khz / m->clock; int hbp = (m->htotal - m->hsync_end) * byte_clk_khz / m->clock; int hsa = (m->hsync_end - m->hsync_start) * byte_clk_khz / m->clock; diff --git a/include/drm/bridge/samsung-dsim.h b/include/drm/bridge/samsung-dsim.h index 76ea8a1720cc..14176e6e9040 100644 --- a/include/drm/bridge/samsung-dsim.h +++ b/include/drm/bridge/samsung-dsim.h @@ -94,6 +94,7 @@ struct samsung_dsim { u32 pll_clk_rate; u32 burst_clk_rate; + u32 hs_clock; u32 esc_clk_rate; u32 lanes; u32 mode_flags; -- 2.39.2