While the rate of TCON0's DCLK matches dotclock for parallel and LVDS
outputs, this doesn't hold for DSI. According manuals from Allwinner,
DCLK is an abbreviation of Data Clock, not dotclock, so go with that
instead.
Signed-off-by: Roman Beranek <me@xxxxxxx>
---
arch/arm/boot/dts/sun5i.dtsi | 2 +-
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 2 +-
arch/arm/boot/dts/sun8i-a83t.dtsi | 2 +-
arch/arm/boot/dts/sun8i-v3s.dtsi | 2 +-
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 250d6b87ab4d..2f901a013676 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -286,7 +286,7 @@ tcon0: lcd-controller@1c0c000 {
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
- clock-output-names = "tcon-pixel-clock";
+ clock-output-names = "tcon-data-clock";
#clock-cells = <0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index f630ab55bb6a..ddc87cc15e51 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -190,7 +190,7 @@ tcon0: lcd-controller@1c0c000 {
clock-names = "ahb",
"tcon-ch0",
"lvds-alt";
- clock-output-names = "tcon-pixel-clock";
+ clock-output-names = "tcon-data-clock";
#clock-cells = <0>;
resets = <&ccu RST_BUS_LCD>,
<&ccu RST_BUS_LVDS>;
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 82fdb04122ca..94eb3bfc989e 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -456,7 +456,7 @@ tcon0: lcd-controller@1c0c000 {
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
clock-names = "ahb", "tcon-ch0";
- clock-output-names = "tcon-pixel-clock";
+ clock-output-names = "tcon-data-clock";
#clock-cells = <0>;
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
reset-names = "lcd", "lvds";
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index db194c606fdc..ab2a0e1235e4 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -191,7 +191,7 @@ tcon0: lcd-controller@1c0c000 {
<&ccu CLK_TCON0>;
clock-names = "ahb",
"tcon-ch0";
- clock-output-names = "tcon-pixel-clock";
+ clock-output-names = "tcon-data-clock";
#clock-cells = <0>;
resets = <&ccu RST_BUS_TCON0>;
reset-names = "lcd";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index cfc60dce80b0..b40474c92d48 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -407,7 +407,7 @@ tcon0: lcd-controller@1c0c000 {
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
clock-names = "ahb", "tcon-ch0";
- clock-output-names = "tcon-pixel-clock";
+ clock-output-names = "tcon-data-clock";
#clock-cells = <0>;
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
reset-names = "lcd", "lvds";
--
2.34.1
