Am 26.04.23 um 09:01 schrieb Thomas Zimmermann:
Hi Am 26.04.23 um 01:39 schrieb kernel@xxxxxxxxxxxx:I'm not sure if this information is useful, but we have found one system whichworks with the 6.1 kernel. I grabbed the lspci output from a working and non-working system, pasted below. Same kernel and same distro. BAD Dell R815 AMD0a:03.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eWThanks for this info. That's a G200eW, which uses slightly different code within the driver. From the testing we've done, we didn't see the bug either. So it's probably something very specific to your machine or the G200EH model.
Oh, now I got it. This G200eW is broken. The other one is good. And the kernel is also broken on the G200EH?
Best regards Thomas
Best regards ThomasWPCM450 (rev 0a) (prog-if 00 [VGA controller]) DeviceName: Embedded Video Subsystem: Dell Device 0444Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 NUMA node: 0 IOMMU group: 10 Region 0: Memory at ec800000 (32-bit, prefetchable) [size=8M]Region 1: Memory at ef7fc000 (32-bit, non-prefetchable) [size=16K]Region 2: Memory at ee800000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: [dc] Power Management version 1Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00: 2b 10 32 05 07 00 90 02 0a 00 00 03 10 20 00 00 10: 08 00 80 ec 00 c0 7f ef 00 00 80 ee 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 44 04 30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 10 20 GOOD Dell R710 INTEL0a:03.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eWWPCM450 (rev 0a) (prog-if 00 [VGA controller]) DeviceName: Embedded Video Subsystem: Dell PowerEdge R710 MGA G200eW WPCM450Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d5000000 (32-bit, prefetchable) [size=8M]Region 1: Memory at deffc000 (32-bit, non-prefetchable) [size=16K]Region 2: Memory at df000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: [dc] Power Management version 1Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00: 2b 10 32 05 07 00 90 02 0a 00 00 03 10 20 00 00 10: 08 00 00 d5 00 c0 ff de 00 00 00 df 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 35 02 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 10 20 Phil
-- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg)
Attachment:
OpenPGP_signature
Description: OpenPGP digital signature