On Fri, Apr 14, 2023 at 06:07:46PM +0200, Guillaume Ranquet wrote:
> The ret variable in mtk_hdmi_pll_calc() was used unitialized as reported
> by the kernel test robot.
>
> Fix the issue by removing the variable altogether and testing out the
> return value of mtk_hdmi_pll_set_hw()
>
> Fixes: 45810d486bb44 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195")
> Reported-by: kernel test robot <lkp@xxxxxxxxx>
> Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
Reviewed-by: Nathan Chancellor <nathan@xxxxxxxxxx>
Can somebody pick this up? It fixes a rather obvious warning, which is
breaking clang builds (as evidenced by three versions of the same fix).
> ---
> drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 8 ++------
> 1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> index abfc077fb0a8..054b73cb31ee 100644
> --- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> +++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> @@ -213,7 +213,7 @@ static int mtk_hdmi_pll_calc(struct mtk_hdmi_phy *hdmi_phy, struct clk_hw *hw,
> u64 tmds_clk, pixel_clk, da_hdmitx21_ref_ck, ns_hdmipll_ck, pcw;
> u8 txpredivs[4] = { 2, 4, 6, 12 };
> u32 fbkdiv_low;
> - int i, ret;
> + int i;
>
> pixel_clk = rate;
> tmds_clk = pixel_clk;
> @@ -292,13 +292,9 @@ static int mtk_hdmi_pll_calc(struct mtk_hdmi_phy *hdmi_phy, struct clk_hw *hw,
> if (!(digital_div <= 32 && digital_div >= 1))
> return -EINVAL;
>
> - mtk_hdmi_pll_set_hw(hw, PLL_PREDIV, fbkdiv_high, fbkdiv_low,
> + return mtk_hdmi_pll_set_hw(hw, PLL_PREDIV, fbkdiv_high, fbkdiv_low,
> PLL_FBKDIV_HS3, posdiv1, posdiv2, txprediv,
> txposdiv, digital_div);
> - if (ret)
> - return -EINVAL;
> -
> - return 0;
> }
>
> static int mtk_hdmi_pll_drv_setting(struct clk_hw *hw)
>
> --
> 2.40.0
>
