Re: [PATCH 04/11] drm/msm/dpu: allow using lm mixer base stage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 20/04/2023 10:26, Arnaud Vrac wrote:
Le jeu. 20 avr. 2023 à 00:43, Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> a écrit :

On 19/04/2023 17:41, Arnaud Vrac wrote:
The dpu backend already handles applying alpha to the base stage, so we
can use it to render the bottom plane in all cases. This allows mixing
one additional plane with the hardware mixer.

Signed-off-by: Arnaud Vrac <avrac@xxxxxxxxxx>

This might require additional changes. First, for the STAGE_BASE pipe
in the source split mode (iow using two LMs) should programmed with
respect to the right LM's x offset (rather than usual left top-left LM).
See  mdss_mdp_pipe_position_update().

Ok, I did test with 2 LMs and it seems to be working, I'll investigate.

The only reference I have here is the fbdev driver, see [1]. The newer SDE driver doesn't handle STAGE_BASE vs STAGE0 (and DPU inherited that design). Maybe this got fixed in hw at some point.

[1] https://git.codelinaro.org/clo/la/kernel/msm-4.19/-/blob/LE.UM.4.4.1.r2-17500-QRB5165.0/drivers/video/fbdev/msm/mdss_mdp_pipe.c#L1789

I think, it only concerns the src_split + multirect cases, where the rectangle base point is on the right LM.



Also this might need some interaction with CTL_MIXER_BORDER_OUT being
set or not. If I remember correctly, if there bottom plane is not
fullscreen or if there are no planes at all, we should set
CTL_MIXER_BORDER_OUT (which takes STAGE_BASE) and start assigning them
from STAGE0. If not, we can use STAGE_BASE.

I also tested with both fullscreen and non-fullscreen primary plane,
and no plane. I'll check this.

Yes, the DPU driver always enables the MIXER_BORDER_OUT.



---
   drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 2 +-
   1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 14b5cfe306113..148921ed62f85 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -881,7 +881,7 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
       r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
       r_pipe->sspp = NULL;

-     pstate->stage = DPU_STAGE_0 + pstate->base.normalized_zpos;
+     pstate->stage = DPU_STAGE_BASE + pstate->base.normalized_zpos;
       if (pstate->stage >= pdpu->catalog->caps->max_mixer_blendstages) {
               DPU_ERROR("> %d plane stages assigned\n",
                         pdpu->catalog->caps->max_mixer_blendstages - DPU_STAGE_0);


--
With best wishes
Dmitry


--
With best wishes
Dmitry




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux