HDMI is not enabled yet on msm8998 so the pinctrl nodes are not
used.
Signed-off-by: Arnaud Vrac <avrac@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index b150437a83558..fb4aa376ef117 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1312,6 +1312,20 @@ blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
drive-strength = <2>;
bias-pull-up;
};
+
+ hdmi_cec_default: hdmi-cec-default-state {
+ pins = "gpio31";
+ function = "hdmi_cec";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hdmi_cec_sleep: hdmi-cec-sleep-state {
+ pins = "gpio31";
+ function = "hdmi_cec";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
remoteproc_mss: remoteproc@4080000 {
--
2.40.0
