TCON0's source clock can be fed from either pll-mipi, or pll-video0-2x,
however MIPI DSI output only seem to work when pll-mipi is selected and
thus some restriction have to be put on reparenting CLK_TCON0.
Functionally, there's no harm to other TCON0 users (LVDS, parallel RGB)
in also forcing them to settle on pll-mipi. The parent will be assigned
during boot based off of tcon0's DT node.
Signed-off-by: Roman Beranek <me@xxxxxxx>
---
drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index dd6212286dcd..ac9bf4e316bf 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -533,7 +533,8 @@ static const char * const tcon0_parents[] = { "pll-mipi", "pll-video0-2x" };
static const u8 tcon0_table[] = { 0, 2, };
static SUNXI_CCU_MUX_TABLE_WITH_GATE(tcon0_clk, "tcon0", tcon0_parents,
tcon0_table, 0x118, 24, 3, BIT(31),
- CLK_SET_RATE_PARENT);
+ CLK_SET_RATE_PARENT |
+ CLK_SET_RATE_NO_REPARENT);
static const char * const tcon1_parents[] = { "pll-video0", "pll-video1" };
static const u8 tcon1_table[] = { 0, 2, };
--
2.34.1
