On Sun, Apr 16, 2023 at 12:01:37PM +0200, Artur Weber wrote: > Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx> > --- > .../display/panel/samsung,s6d7aa0.yaml | 51 +++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml > new file mode 100644 > index 000000000000..969cef7738b8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml > @@ -0,0 +1,51 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Samsung S6D7AA0 MIPI-DSI LCD panel controller > + > +maintainers: > + - Artur Weber <aweber.kernel@xxxxxxxxx> > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + const: samsung,s6d7aa0-lsl080al02 > + > + reg: true > + reset-gpios: true > + backlight: true > + > + enable-supply: > + description: Enable supply If there's only a single supply, then why not use panel-simple-dsi.yaml? > + > +required: > + - compatible > + - reset-gpios > + - enable-supply > + - backlight > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + dsi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + panel@0 { > + compatible = "samsung,s6d7aa0-lsl080al02"; > + reg = <0>; > + enable-supply = <&lcd_enable_supply>; > + reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>; > + backlight = <&backlight>; > + }; > + }; > + > +... > -- > 2.40.0 >
