Add bindings for the S6D7AA0 LCD panel controller, including the S6D7AA0-LSL080AL02 panel used in the Samsung Galaxy Tab 3 8.0 family of tablets. Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx> --- Changed in v2: - Updated commit message - Applied suggestions from Krzysztof Kozlowski Changed in v3: - Correctly applied suggestions --- .../display/panel/samsung,s6d7aa0.yaml | 52 +++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml new file mode 100644 index 000000000000..079e2b3a9eaf --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6D7AA0 MIPI-DSI LCD panel controller + +maintainers: + - Artur Weber <aweber.kernel@xxxxxxxxx> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,s6d7aa0-lsl080al02 + + reg: true + reset-gpios: true + backlight: true + + enable-supply: + description: Enable supply + +required: + - compatible + - reg + - reset-gpios + - backlight + - enable-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6d7aa0-lsl080al02"; + reg = <0>; + reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + enable-supply = <&lcd_enable_supply>; + }; + }; + +... -- 2.40.0
