Re: [PATCH 20/27] arm64: dts: mediatek: mt6795: Add tertiary PWM node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 12/04/2023 13:27, AngeloGioacchino Del Regno wrote:
The PWM at 0x11006000 is the tertiary PWM; unlike PWM0, PWM1, this is
not display specific and can be used as a generic PWM controller.

This node is left disabled as usage is board-specific.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>

Applied, thanks!

---
  arch/arm64/boot/dts/mediatek/mt6795.dtsi | 19 +++++++++++++++++++
  1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
index cf45cb4ad3d2..50d9276d18c6 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -583,6 +583,25 @@ uart3: serial@11005000 {
  			status = "disabled";
  		};
+ pwm2: pwm@11006000 {
+			compatible = "mediatek,mt6795-pwm";
+			reg = <0 0x11006000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&pericfg CLK_PERI_PWM>,
+				 <&pericfg CLK_PERI_PWM1>,
+				 <&pericfg CLK_PERI_PWM2>,
+				 <&pericfg CLK_PERI_PWM3>,
+				 <&pericfg CLK_PERI_PWM4>,
+				 <&pericfg CLK_PERI_PWM5>,
+				 <&pericfg CLK_PERI_PWM6>,
+				 <&pericfg CLK_PERI_PWM7>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4", "pwm5", "pwm6", "pwm7";
+			status = "disabled";
+		};
+
  		i2c0: i2c@11007000 {
  			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
  			reg = <0 0x11007000 0 0x70>, <0 0x11000100 0 0x80>;



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux