Re: [PATCH] dt-bindings: bridge: Convert Samsung MIPI DSIM bridge to yaml

[Marek Vasut <marex@xxxxxxx>]

On 3/31/23 21:57, Fabio Estevam wrote:
[...]

> -Example:
> -
> -	dsi@11c80000 {
> -		compatible = "samsung,exynos4210-mipi-dsi";
> -		reg = <0x11C80000 0x10000>;
> -		interrupts = <0 79 0>;
> -		clocks = <&clock 286>, <&clock 143>;
> -		clock-names = "bus_clk", "sclk_mipi";
> -		phys = <&mipi_phy 1>;
> -		phy-names = "dsim";
> -		vddcore-supply = <&vusb_reg>;
> -		vddio-supply = <&vmipi_reg>;
> -		power-domains = <&pd_lcd0>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;

(*)

> -		samsung,pll-clock-frequency = <24000000>;
> -
> -		panel@1 {
> -			reg = <0>;
> -			...
> -			port {
> -				panel_ep: endpoint {
> -					remote-endpoint = <&dsi_ep>;
> -				};
> -			};
> -		};
> -
> -		ports {
> -			#address-cells = <1>;
> -			#size-cells = <0>;

You likely don't need the address/size cells here if the super-node 
already defined those (*) above