With bpp bits per pixel transmitted over n DSI lanes, the target DCLK
rate for a given pixel clock is obtained as follows:
DCLK rate = 1/4 * bpp / n * pixel clock
Effect of this change can be observed through the rate of Vblank IRQs
which should now match refresh rate implied by set display mode. It
was verified to do so on a A64 board with a 2-lane and a 4-lane panel.
Roman Beranek (3):
drm: sun4i: rename sun4i_dotclock to sun4i_tcon_dclk
ARM: dts: sunxi: rename tcon's clock output
drm: sun4i: calculate proper DCLK rate for DSI
arch/arm/boot/dts/sun5i.dtsi | 2 +-
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 2 +-
arch/arm/boot/dts/sun8i-a83t.dtsi | 2 +-
arch/arm/boot/dts/sun8i-v3s.dtsi | 2 +-
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 +-
drivers/gpu/drm/sun4i/Makefile | 2 +-
drivers/gpu/drm/sun4i/sun4i_tcon.c | 46 +++++++++++--------
.../{sun4i_dotclock.c => sun4i_tcon_dclk.c} | 2 +-
.../{sun4i_dotclock.h => sun4i_tcon_dclk.h} | 0
9 files changed, 33 insertions(+), 27 deletions(-)
rename drivers/gpu/drm/sun4i/{sun4i_dotclock.c => sun4i_tcon_dclk.c} (99%)
rename drivers/gpu/drm/sun4i/{sun4i_dotclock.h => sun4i_tcon_dclk.h} (100%)
--
2.32.0 (Apple Git-132)
