Re: [PATCH v7 27/32] drm/msm/dpu: add support for wide planes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 30/03/2023 05:53, Abhinav Kumar wrote:


On 3/16/2023 9:16 AM, Dmitry Baryshkov wrote:
It is possible to use multirect feature and split source to use the SSPP
to output two consecutive rectangles. This commit brings in this
capability to support wider screen resolutions.

Tested-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c  |  19 ++-
  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 136 +++++++++++++++++++---
  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h |   4 +
  3 files changed, 142 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 217a8112f1a2..90b406e409d3 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -481,6 +481,15 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
                         format, fb ? fb->modifier : 0,
                         &pstate->pipe, 0, stage_cfg);
+        if (pstate->r_pipe.sspp) {
+            set_bit(pstate->r_pipe.sspp->idx, fetch_active);
+            _dpu_crtc_blend_setup_pipe(crtc, plane,
+                           mixer, cstate->num_mixers,
+                           pstate->stage,
+                           format, fb ? fb->modifier : 0,
+                           &pstate->r_pipe, 1, stage_cfg);
+        }
+
          /* blend config update */
          for (lm_idx = 0; lm_idx < cstate->num_mixers; lm_idx++) {
              _dpu_crtc_setup_blend_cfg(mixer + lm_idx, pstate, format);
@@ -1341,10 +1350,16 @@ static int _dpu_debugfs_status_show(struct seq_file *s, void *data)
          seq_printf(s, "\tdst x:%4d dst_y:%4d dst_w:%4d dst_h:%4d\n",
              state->crtc_x, state->crtc_y, state->crtc_w,
              state->crtc_h);
-        seq_printf(s, "\tsspp:%s\n",
+        seq_printf(s, "\tsspp[0]:%s\n",
                 pstate->pipe.sspp->cap->name);
-        seq_printf(s, "\tmultirect: mode: %d index: %d\n",
+        seq_printf(s, "\tmultirect[0]: mode: %d index: %d\n",
              pstate->pipe.multirect_mode, pstate->pipe.multirect_index);
+        if (pstate->r_pipe.sspp) {
+            seq_printf(s, "\tsspp[1]:%s\n",
+                   pstate->r_pipe.sspp->cap->name);
+            seq_printf(s, "\tmultirect[1]: mode: %d index: %d\n",
+                   pstate->r_pipe.multirect_mode, pstate->r_pipe.multirect_index);
+        }
          seq_puts(s, "\n");
      }
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index f52120b05b6e..73db15d76059 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -701,6 +701,10 @@ static void _dpu_plane_color_fill(struct dpu_plane *pdpu,
      /* update sspp */
      _dpu_plane_color_fill_pipe(pstate, &pstate->pipe, &pstate->pipe_cfg.dst_rect,
                     fill_color, fmt);
+
+    if (pstate->r_pipe.sspp)
+        _dpu_plane_color_fill_pipe(pstate, &pstate->r_pipe, &pstate->r_pipe_cfg.dst_rect,
+                       fill_color, fmt);
  }
  int dpu_plane_validate_multirect_v2(struct dpu_multirect_plane_states *plane) @@ -959,9 +963,12 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
      int ret = 0, min_scale;
      struct dpu_plane *pdpu = to_dpu_plane(plane);
      struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
+    struct dpu_sw_pipe *pipe = &pstate->pipe;
+    struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
      const struct drm_crtc_state *crtc_state = NULL;
      const struct dpu_format *fmt;
      struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
+    struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
      struct drm_rect fb_rect = { 0 };
      uint32_t max_linewidth;
      unsigned int rotation;
@@ -985,8 +992,11 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
      if (!new_plane_state->visible)
          return 0;
-    pstate->pipe.multirect_index = DPU_SSPP_RECT_SOLO;
-    pstate->pipe.multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+    pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+    pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+    r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+    r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+    r_pipe->sspp = NULL;
      pstate->stage = DPU_STAGE_0 + pstate->base.normalized_zpos;
      if (pstate->stage >= pdpu->catalog->caps->max_mixer_blendstages) {
@@ -1016,21 +1026,67 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
          return -E2BIG;
      }
+    fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
+
      max_linewidth = pdpu->catalog->caps->max_linewidth;
-    /* check decimated source width */
      if (drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) {
-        DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
-                DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
-        return -E2BIG;
-    }
+        /*
+         * In parallel multirect case only the half of the usual width
+         * is supported for tiled formats. If we are here, we know that
+         * full width is more than max_linewidth, thus each rect is
+         * wider than allowed.
+         */
+        if (DPU_FORMAT_IS_UBWC(fmt)) {
+            DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, tiled format\n",
+                    DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
+            return -E2BIG;
+        }

I am seeing a strange issue due to this check. Looks like Chrome compositor tries to do the first frame with UBWC. When I bootup with my DP monitor connected, it tries to use 2560x1440 with UBWC enabled but then fails and then uses linear format and works.

I confirmed by commenting out this check that its always UBWC.

I feel this is a compositor issue. If someone can confirm this that would be great because there is nothing wrong with this check.

Yes, I think it is a compositor issue (or misfeature).


I only want to report this because when this series is cherry-picked and someone tries to bootup with DP connected and it if it does hit this check based on which monitor they try, UBWC no longer works.

If we can move on and leave that out as compositor issue, I will add my R-b once the other comment is responded to.

Rest of the testing looks fine.

-    fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
+        if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
+            DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
+                    DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
+            return -E2BIG;
+        }
-    ret = dpu_plane_atomic_check_pipe(pdpu, &pstate->pipe, pipe_cfg, fmt); +        if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) || +            drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) || +            (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) && +             !test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features)) ||
+            DPU_FORMAT_IS_YUV(fmt)) {
+            DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, can't use split source\n",
+                    DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
+            return -E2BIG;
+        }
+
+        /*
+         * Use multirect for wide plane. We do not support dynamic
+         * assignment of SSPPs, so we know the configuration.
+         */
+        pipe->multirect_index = DPU_SSPP_RECT_0;
+        pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
+
+        r_pipe->sspp = pipe->sspp;
+        r_pipe->multirect_index = DPU_SSPP_RECT_1;
+        r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
+
+        *r_pipe_cfg = *pipe_cfg;
+        pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1; +        pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
+        r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
+        r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
+    }
+
+    ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt);
      if (ret)
          return ret;
+    if (r_pipe->sspp) {
+        ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt);
+        if (ret)
+            return ret;
+    }
+
      supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0;
      if (pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION))
@@ -1097,8 +1153,10 @@ void dpu_plane_flush(struct drm_plane *plane)
      else if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG)
          /* force 100% alpha */
          _dpu_plane_color_fill(pdpu, pdpu->color_fill, 0xFF);
-    else
+    else {
          dpu_plane_flush_csc(pdpu, &pstate->pipe);
+        dpu_plane_flush_csc(pdpu, &pstate->r_pipe);
+    }
      /* flag h/w flush complete */
      if (plane->state)
@@ -1210,13 +1268,14 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
      struct drm_plane_state *state = plane->state;
      struct dpu_plane_state *pstate = to_dpu_plane_state(state);
      struct dpu_sw_pipe *pipe = &pstate->pipe;
+    struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
      struct drm_crtc *crtc = state->crtc;
      struct drm_framebuffer *fb = state->fb;
      bool is_rt_pipe;
      const struct dpu_format *fmt =
          to_dpu_format(msm_framebuffer_format(fb));
      struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
-
+    struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
      struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
      struct msm_gem_address_space *aspace = kms->base.aspace;
      struct dpu_hw_fmt_layout layout;
@@ -1244,6 +1303,12 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
                     drm_mode_vrefresh(&crtc->mode),
                     layout_valid ? &layout : NULL);
+    if (r_pipe->sspp) {
+        dpu_plane_sspp_update_pipe(plane, r_pipe, r_pipe_cfg, fmt,
+                       drm_mode_vrefresh(&crtc->mode),
+                       layout_valid ? &layout : NULL);
+    }
+
      if (pstate->needs_qos_remap)
          pstate->needs_qos_remap = false;
@@ -1251,16 +1316,31 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
                              &crtc->mode, pipe_cfg);
      pstate->plane_clk = _dpu_plane_calc_clk(&crtc->mode, pipe_cfg);
+
+    if (r_pipe->sspp) {
+        pstate->plane_fetch_bw += _dpu_plane_calc_bw(pdpu->catalog, fmt, &crtc->mode, r_pipe_cfg);
+
+        pstate->plane_clk = max(pstate->plane_clk, _dpu_plane_calc_clk(&crtc->mode, r_pipe_cfg));
+    }
  }
  static void _dpu_plane_atomic_disable(struct drm_plane *plane)
  {
      struct drm_plane_state *state = plane->state;
      struct dpu_plane_state *pstate = to_dpu_plane_state(state);
+    struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
      trace_dpu_plane_disable(DRMID(plane), false,
                  pstate->pipe.multirect_mode);
+    if (r_pipe->sspp) {
+        r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+        r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+
+        if (r_pipe->sspp->ops.setup_multirect)
+            r_pipe->sspp->ops.setup_multirect(r_pipe);
+    }

Dont we need to do this even for pstate->pipe?

No. pstate->pipe will be set up when we call dpu_plane_sspp_atomic_update() next time. It doesn't seem to matter if the disabled SSPP is setup for REC_SOLO or REC_0. We have to ensure that REC_1 is disabled so that it doesn't conflict with REC_SOLO setup.

+
      pstate->pending = true;
  }
@@ -1293,6 +1373,9 @@ static void dpu_plane_destroy(struct drm_plane *plane)
          pstate = to_dpu_plane_state(plane->state);
          _dpu_plane_set_qos_ctrl(plane, &pstate->pipe, false, DPU_PLANE_QOS_PANIC_CTRL);
+        if (pstate->r_pipe.sspp)
+            _dpu_plane_set_qos_ctrl(plane, &pstate->r_pipe, false, DPU_PLANE_QOS_PANIC_CTRL);
+
          mutex_destroy(&pdpu->lock);
          /* this will destroy the states as well */
@@ -1373,12 +1456,29 @@ static void dpu_plane_atomic_print_state(struct drm_printer *p,
          const struct drm_plane_state *state)
  {
      const struct dpu_plane_state *pstate = to_dpu_plane_state(state);
+    const struct dpu_sw_pipe *pipe = &pstate->pipe;
+    const struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
+    const struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
+    const struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
      drm_printf(p, "\tstage=%d\n", pstate->stage);
-    drm_printf(p, "\tsspp=%s\n", pstate->pipe.sspp->cap->name);
-    drm_printf(p, "\tmultirect_mode=%s\n", dpu_get_multirect_mode(pstate->pipe.multirect_mode));
-    drm_printf(p, "\tmultirect_index=%s\n",
-           dpu_get_multirect_index(pstate->pipe.multirect_index));
+
+    drm_printf(p, "\tsspp[0]=%s\n", pipe->sspp->cap->name);
+    drm_printf(p, "\tmultirect_mode[0]=%s\n", dpu_get_multirect_mode(pipe->multirect_mode));
+    drm_printf(p, "\tmultirect_index[0]=%s\n",
+           dpu_get_multirect_index(pipe->multirect_index));
+    drm_printf(p, "\tsrc[0]=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&pipe_cfg->src_rect)); +    drm_printf(p, "\tdst[0]=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&pipe_cfg->dst_rect));
+
+    if (r_pipe->sspp) {
+        drm_printf(p, "\tsspp[1]=%s\n", r_pipe->sspp->cap->name);
+        drm_printf(p, "\tmultirect_mode[1]=%s\n",
+               dpu_get_multirect_mode(r_pipe->multirect_mode));
+        drm_printf(p, "\tmultirect_index[1]=%s\n",
+               dpu_get_multirect_index(r_pipe->multirect_index));
+        drm_printf(p, "\tsrc[1]=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&r_pipe_cfg->src_rect)); +        drm_printf(p, "\tdst[1]=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&r_pipe_cfg->dst_rect));
+    }
  }
  static void dpu_plane_reset(struct drm_plane *plane)
@@ -1412,6 +1512,10 @@ static void dpu_plane_reset(struct drm_plane *plane)        * This is the place where the state is allocated, so fill it fully.
       */
      pstate->pipe.sspp = dpu_rm_get_sspp(&dpu_kms->rm, pdpu->pipe);
+    pstate->pipe.multirect_index = DPU_SSPP_RECT_SOLO;
+    pstate->pipe.multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+
+    pstate->r_pipe.sspp = NULL;
      __drm_atomic_helper_plane_reset(plane, &pstate->base);
  }
@@ -1428,6 +1532,8 @@ void dpu_plane_danger_signal_ctrl(struct drm_plane *plane, bool enable)
      pm_runtime_get_sync(&dpu_kms->pdev->dev);
      _dpu_plane_set_qos_ctrl(plane, &pstate->pipe, enable, DPU_PLANE_QOS_PANIC_CTRL);
+    if (pstate->r_pipe.sspp)
+        _dpu_plane_set_qos_ctrl(plane, &pstate->r_pipe, enable, DPU_PLANE_QOS_PANIC_CTRL);
      pm_runtime_put_sync(&dpu_kms->pdev->dev);
  }
  #endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
index 0ca9002015ff..7490ffd94d03 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
@@ -19,7 +19,9 @@
   * @base:    base drm plane state object
   * @aspace:    pointer to address space for input/output buffers
   * @pipe:    software pipe description
+ * @r_pipe:    software pipe description of the second pipe
   * @pipe_cfg:    software pipe configuration
+ * @r_pipe_cfg:    software pipe configuration for the second pipe
   * @stage:    assigned by crtc blender
   * @needs_qos_remap: qos remap settings need to be updated
   * @multirect_index: index of the rectangle of SSPP
@@ -34,7 +36,9 @@ struct dpu_plane_state {
      struct drm_plane_state base;
      struct msm_gem_address_space *aspace;
      struct dpu_sw_pipe pipe;
+    struct dpu_sw_pipe r_pipe;
      struct dpu_sw_pipe_cfg pipe_cfg;
+    struct dpu_sw_pipe_cfg r_pipe_cfg;
      enum dpu_stage stage;
      bool needs_qos_remap;
      bool pending;

--
With best wishes
Dmitry




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux