On ATSM the PL1 limit is disabled at power up. The previous uapi assumed that the PL1 limit is always enabled and therefore did not have a notion of a disabled PL1 limit. This results in erroneous PL1 limit values when the PL1 limit is disabled. For example at power up, the disabled ATSM PL1 limit was previously shown as 0 which means a low PL1 limit whereas the limit being disabled actually implies a high effective PL1 limit value. To get round this problem, the PL1 limit uapi is expanded to include a special value 0 to designate a disabled PL1 limit. Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/8062 Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/8060 Signed-off-by: Ashutosh Dixit <ashutosh.dixit@xxxxxxxxx> --- .../ABI/testing/sysfs-driver-intel-i915-hwmon | 3 ++- drivers/gpu/drm/i915/i915_hwmon.c | 24 +++++++++++++++++++ 2 files changed, 26 insertions(+), 1 deletion(-) diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon index 2d6a472eef885..96fec0bb74c2c 100644 --- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon +++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon @@ -14,7 +14,8 @@ Description: RW. Card reactive sustained (PL1/Tau) power limit in microwatts. The power controller will throttle the operating frequency if the power averaged over a window (typically seconds) - exceeds this limit. + exceeds this limit. A read value of 0 means that the PL1 power + limit is disabled. Writing 0 disables the limit if possible. Only supported for particular Intel i915 graphics platforms. diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c index 596dd2c070106..c099057888914 100644 --- a/drivers/gpu/drm/i915/i915_hwmon.c +++ b/drivers/gpu/drm/i915/i915_hwmon.c @@ -349,6 +349,8 @@ hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan) } } +#define PL1_DISABLE 0 + /* * HW allows arbitrary PL1 limits to be set but silently clamps these values to * "typical but not guaranteed" min/max values in rg.pkg_power_sku. Follow the @@ -362,6 +364,14 @@ hwm_power_max_read(struct hwm_drvdata *ddat, long *val) intel_wakeref_t wakeref; u64 r, min, max; + /* Check if PL1 limit is disabled */ + with_intel_runtime_pm(ddat->uncore->rpm, wakeref) + r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit); + if (!(r & PKG_PWR_LIM_1_EN)) { + *val = PL1_DISABLE; + return 0; + } + *val = hwm_field_read_and_scale(ddat, hwmon->rg.pkg_rapl_limit, PKG_PWR_LIM_1, @@ -385,8 +395,22 @@ static int hwm_power_max_write(struct hwm_drvdata *ddat, long val) { struct i915_hwmon *hwmon = ddat->hwmon; + intel_wakeref_t wakeref; u32 nval; + if (val == PL1_DISABLE) { + /* Disable PL1 limit */ + hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit, + PKG_PWR_LIM_1_EN, 0); + + /* Verify, because PL1 limit cannot be disabled on all platforms */ + with_intel_runtime_pm(ddat->uncore->rpm, wakeref) + nval = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit); + if (nval & PKG_PWR_LIM_1_EN) + return -EPERM; + return 0; + } + /* Computation in 64-bits to avoid overflow. Round to nearest. */ nval = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_power, SF_POWER); nval = PKG_PWR_LIM_1_EN | REG_FIELD_PREP(PKG_PWR_LIM_1, nval); -- 2.38.0
