Panels are supposed to have one reg. This fixes dtbs_check warnings like: sc7180-idp.dtb: panel@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- .../display/panel/visionox,rm69299.yaml | 25 +++++++++++++------ 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml index 481ef051df1e..444ac2a4772d 100644 --- a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml +++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml @@ -19,6 +19,8 @@ properties: compatible: const: visionox,rm69299-1080p-display + reg: true + vdda-supply: description: | Phandle of the regulator that provides the vdda supply voltage. @@ -34,6 +36,7 @@ additionalProperties: false required: - compatible + - reg - vdda-supply - vdd3p3-supply - reset-gpios @@ -41,16 +44,22 @@ required: examples: - | - panel { - compatible = "visionox,rm69299-1080p-display"; + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "visionox,rm69299-1080p-display"; + reg = <0>; - vdda-supply = <&src_pp1800_l8c>; - vdd3p3-supply = <&src_pp2800_l18a>; + vdda-supply = <&src_pp1800_l8c>; + vdd3p3-supply = <&src_pp2800_l18a>; - reset-gpios = <&pm6150l_gpio 3 0>; - port { - panel0_in: endpoint { - remote-endpoint = <&dsi0_out>; + reset-gpios = <&pm6150l_gpio 3 0>; + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; }; }; }; -- 2.34.1