[PATCH v7 12/32] drm/msm/dpu: remove dpu_hw_fmt_layout from struct dpu_hw_sspp_cfg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Remove dpu_hw_fmt_layout instance from struct dpu_hw_sspp_cfg, leaving
only src_rect and dst_rect. This way all the pipes used by the plane
will have a common layout instance (as the framebuffer is shared between
them), while still keeping a separate src/dst rectangle configuration
for each pipe.

Reviewed-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
Tested-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c | 32 ++++++++++-----------
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h |  6 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c   | 10 +++----
 3 files changed, 23 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
index ab95f2817378..e87c6377f315 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
@@ -490,7 +490,7 @@ static void dpu_hw_sspp_setup_rects(struct dpu_sw_pipe *pipe,
 }
 
 static void dpu_hw_sspp_setup_sourceaddress(struct dpu_sw_pipe *pipe,
-		struct dpu_hw_sspp_cfg *cfg)
+		struct dpu_hw_fmt_layout *layout)
 {
 	struct dpu_hw_sspp *ctx = pipe->sspp;
 	u32 ystride0, ystride1;
@@ -501,41 +501,41 @@ static void dpu_hw_sspp_setup_sourceaddress(struct dpu_sw_pipe *pipe,
 		return;
 
 	if (pipe->multirect_index == DPU_SSPP_RECT_SOLO) {
-		for (i = 0; i < ARRAY_SIZE(cfg->layout.plane_addr); i++)
+		for (i = 0; i < ARRAY_SIZE(layout->plane_addr); i++)
 			DPU_REG_WRITE(&ctx->hw, SSPP_SRC0_ADDR + idx + i * 0x4,
-					cfg->layout.plane_addr[i]);
+					layout->plane_addr[i]);
 	} else if (pipe->multirect_index == DPU_SSPP_RECT_0) {
 		DPU_REG_WRITE(&ctx->hw, SSPP_SRC0_ADDR + idx,
-				cfg->layout.plane_addr[0]);
+				layout->plane_addr[0]);
 		DPU_REG_WRITE(&ctx->hw, SSPP_SRC2_ADDR + idx,
-				cfg->layout.plane_addr[2]);
+				layout->plane_addr[2]);
 	} else {
 		DPU_REG_WRITE(&ctx->hw, SSPP_SRC1_ADDR + idx,
-				cfg->layout.plane_addr[0]);
+				layout->plane_addr[0]);
 		DPU_REG_WRITE(&ctx->hw, SSPP_SRC3_ADDR + idx,
-				cfg->layout.plane_addr[2]);
+				layout->plane_addr[2]);
 	}
 
 	if (pipe->multirect_index == DPU_SSPP_RECT_SOLO) {
-		ystride0 = (cfg->layout.plane_pitch[0]) |
-			(cfg->layout.plane_pitch[1] << 16);
-		ystride1 = (cfg->layout.plane_pitch[2]) |
-			(cfg->layout.plane_pitch[3] << 16);
+		ystride0 = (layout->plane_pitch[0]) |
+			(layout->plane_pitch[1] << 16);
+		ystride1 = (layout->plane_pitch[2]) |
+			(layout->plane_pitch[3] << 16);
 	} else {
 		ystride0 = DPU_REG_READ(&ctx->hw, SSPP_SRC_YSTRIDE0 + idx);
 		ystride1 = DPU_REG_READ(&ctx->hw, SSPP_SRC_YSTRIDE1 + idx);
 
 		if (pipe->multirect_index == DPU_SSPP_RECT_0) {
 			ystride0 = (ystride0 & 0xFFFF0000) |
-				(cfg->layout.plane_pitch[0] & 0x0000FFFF);
+				(layout->plane_pitch[0] & 0x0000FFFF);
 			ystride1 = (ystride1 & 0xFFFF0000)|
-				(cfg->layout.plane_pitch[2] & 0x0000FFFF);
+				(layout->plane_pitch[2] & 0x0000FFFF);
 		} else {
 			ystride0 = (ystride0 & 0x0000FFFF) |
-				((cfg->layout.plane_pitch[0] << 16) &
+				((layout->plane_pitch[0] << 16) &
 				 0xFFFF0000);
 			ystride1 = (ystride1 & 0x0000FFFF) |
-				((cfg->layout.plane_pitch[2] << 16) &
+				((layout->plane_pitch[2] << 16) &
 				 0xFFFF0000);
 		}
 	}
@@ -564,7 +564,7 @@ static void dpu_hw_sspp_setup_csc(struct dpu_hw_sspp *ctx,
 static void dpu_hw_sspp_setup_solidfill(struct dpu_sw_pipe *pipe, u32 color)
 {
 	struct dpu_hw_sspp *ctx = pipe->sspp;
-	struct dpu_hw_sspp_cfg cfg;
+	struct dpu_hw_fmt_layout cfg;
 	u32 idx;
 
 	if (_sspp_subblk_offset(ctx, DPU_SSPP_SRC, &idx))
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
index 136b8713943f..100d8e06c90d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
@@ -154,13 +154,11 @@ struct dpu_hw_pixel_ext {
 
 /**
  * struct dpu_hw_sspp_cfg : SSPP configuration
- * @layout:    format layout information for programming buffer to hardware
  * @src_rect:  src ROI, caller takes into account the different operations
  *             such as decimation, flip etc to program this field
  * @dest_rect: destination ROI.
  */
 struct dpu_hw_sspp_cfg {
-	struct dpu_hw_fmt_layout layout;
 	struct drm_rect src_rect;
 	struct drm_rect dst_rect;
 };
@@ -243,10 +241,10 @@ struct dpu_hw_sspp_ops {
 	/**
 	 * setup_sourceaddress - setup pipe source addresses
 	 * @pipe: Pointer to software pipe context
-	 * @cfg: Pointer to pipe config structure
+	 * @layout: format layout information for programming buffer to hardware
 	 */
 	void (*setup_sourceaddress)(struct dpu_sw_pipe *ctx,
-				    struct dpu_hw_sspp_cfg *cfg);
+				    struct dpu_hw_fmt_layout *layout);
 
 	/**
 	 * setup_csc - setup color space coversion
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 8c98385303ea..4ae70d21c37a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -471,21 +471,21 @@ static void _dpu_plane_set_qos_remap(struct drm_plane *plane)
 
 static void _dpu_plane_set_scanout(struct drm_plane *plane,
 		struct dpu_plane_state *pstate,
-		struct dpu_hw_sspp_cfg *pipe_cfg,
 		struct drm_framebuffer *fb)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
 	struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
 	struct msm_gem_address_space *aspace = kms->base.aspace;
+	struct dpu_hw_fmt_layout layout;
 	int ret;
 
-	ret = dpu_format_populate_layout(aspace, fb, &pipe_cfg->layout);
+	ret = dpu_format_populate_layout(aspace, fb, &layout);
 	if (ret)
 		DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
 	else if (pstate->pipe.sspp->ops.setup_sourceaddress) {
 		trace_dpu_plane_set_scanout(&pstate->pipe,
-					    &pipe_cfg->layout);
-		pstate->pipe.sspp->ops.setup_sourceaddress(&pstate->pipe, pipe_cfg);
+					    &layout);
+		pstate->pipe.sspp->ops.setup_sourceaddress(&pstate->pipe, &layout);
 	}
 }
 
@@ -1134,7 +1134,7 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 
 	memset(&pipe_cfg, 0, sizeof(struct dpu_hw_sspp_cfg));
 
-	_dpu_plane_set_scanout(plane, pstate, &pipe_cfg, fb);
+	_dpu_plane_set_scanout(plane, pstate, fb);
 
 	pstate->pending = true;
 
-- 
2.30.2




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux